{"title":"Civil Engineering - All Products","description":"","products":[{"product_id":"heizwendelschweissgerat-zeen800","title":"Electrofusion Welder ZEEN-800 d 16 - 160mm","description":"\u003cp\u003e\u003cstrong\u003eElectrofusion Welding Machine \"ZEEN-800\" incl. Adapter and optional Scanner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eprofessional electrofusion welding with documentation for only €1,099.00 - electrofusion welding according to DVS 2207 with the ZEEN-800! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZEEN 800 electrofusion welding machine is a versatile electrofusion welding device suitable for welding all electrofusion fittings up to 160 mm diameter. The operator works at a safety voltage of less than 50 volts. The device supports all electrofusion sockets up to 160 mm. The ZEEN 800 impresses with its simple and clear operation of the control program, an electronic control system that reacts in real time to changes in performance parameters, and automatic adjustment of welding time depending on ambient temperature. The device stores data from up to 3000 welds. Welding protocols can be read out via the USB interface, the welder's firmware can be updated, or a printer can be connected for immediate printing of the protocols. The machine is manufactured in Poland according to current standards. If required, you can have the optional annual calibration performed by us at a reasonable cost. We will gladly send you more information upon request!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003erobust and durable electrofusion welding machine for tough construction site use\u003c\/li\u003e\n\n\u003cli\u003eRange: Electrofusion fittings with a diameter of up to 160 mm\u003c\/li\u003e\n\n\u003cli\u003eDelivered calibrated and adjusted according to DVS 2207, of course\u003c\/li\u003e\n\n\u003cli\u003eRecording of welding parameters (up to 3000 welding protocols)\u003c\/li\u003e\n\n\u003cli\u003eReading out data via USB port with the option to print the protocol\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003esimple, self-explanatory operation\u003c\/li\u003e\n\n\u003cli\u003eoptical and acoustic signaling of the welding process\u003c\/li\u003e\n\n\u003cli\u003eOperating voltage: 8 V to 44 V\u003c\/li\u003e\n\n\u003cli\u003eInput of welding data using the keyboard or automatic input of welding data via barcode scanner according to \u003cspan\u003eISO 13950\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\"Repeat mode\" - automatic programming when using the settings of the last welding process\u003c\/li\u003e\n\n\u003cli\u003eincl. \u003cspan\u003etraceability function\u003c\/span\u003e (ISO 12176-3 \/ ISO 12176-4)\u003c\/li\u003e\n\n\u003cli\u003ewith the option to connect an external GPS antenna\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Electrofusion welding machine, scanner of choice, transport box, adapter 4 mm, 4.7 mm\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eCalibration according to DVS 2207 standard\u003c\/p\u003e\n\u003cp\u003eDiameter: 16\u003cspan\u003e-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoltage: 230 V \/ 50Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1450 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 12 Kilograms\u003c\/p\u003e\n\u003cp\u003eWelding Voltage:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e8-44 V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtection Class: IP54\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDimensions: 390x240x160 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Generator: 2 Kilowatts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable Operating Languages: PL, ENG, RU, GER, HU, FR, RO, NO, IT, RO, LT, ESP, CZ, SK\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePorts: USB Type A, USB Type B, M12\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"without scanner","offer_id":45457793941772,"sku":"","price":1099.99,"currency_code":"EUR","in_stock":true},{"title":"Corded Scanner - Honeywell","offer_id":53736017658124,"sku":"","price":1199.99,"currency_code":"EUR","in_stock":true},{"title":"Wireless Scanner - NT 1100 LW","offer_id":53736017690892,"sku":"","price":1199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/heizwendelschweissgeraet_ZEEN800.png?v=1761208559"},{"product_id":"uni-schalgerat-d-63-bis-d-125","title":"UNI peeling tools d 63 - 125mm","description":"\u003cp\u003eUNI scrapers for pipe diameters 63 - 125mm\u003c\/p\u003e\n\u003cp\u003eIdeal for preparing saddle and electrofusion welded joints. For mechanical processing of surfaces of PE\/PP plastic pipes during electrofusion welding.\u003c\/p\u003e\n\u003cp\u003eOur UNI scrapers can be securely fixed to the pipe by pressing them on – without additional locking. Scraping can then begin immediately. Thanks to the compact design, scraping is also possible in confined spaces. UNI scrapers are ideal for preparing saddle and electrofusion welded joints.\u003c\/p\u003e\n\u003cp\u003eEach scraper is delivered in a robust transport case.\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"d 63mm","offer_id":41960204271776,"sku":"","price":549.99,"currency_code":"EUR","in_stock":true},{"title":"d 75mm","offer_id":41960204435616,"sku":"","price":549.99,"currency_code":"EUR","in_stock":true},{"title":"D 90mm","offer_id":41960204599456,"sku":"","price":549.99,"currency_code":"EUR","in_stock":true},{"title":"d 110mm","offer_id":41960204697760,"sku":"","price":549.99,"currency_code":"EUR","in_stock":true},{"title":"d 125mm","offer_id":41960204796064,"sku":"","price":549.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/uni-schaelgeraet_b0fee541-794d-4fc2-bae4-cd17b2254dd9.jpg?v=1683832852"},{"product_id":"uni-schalgerat-d-140-180","title":"UNI peeling tools d 140 - 180mm","description":"\u003cp\u003eUNI Scraper for pipe diameters 140 - 180 mm\u003c\/p\u003e\n\u003cp\u003eIdeal for preparing saddle and electrofusion sleeve connections. For mechanical surface preparation of PE\/PP plastic pipes during electrofusion welding.\u003c\/p\u003e\n\u003cp\u003eOur UNI scrapers can be securely fixed to the pipe by pressing them on – without additional locking mechanisms. Scraping can then begin immediately. Thanks to their compact design, scraping is also possible in confined spaces. UNI scrapers are ideal for preparing saddle and electrofusion sleeve welding connections.\u003c\/p\u003e\n\u003cp\u003eEach scraper is delivered in a robust transport case.\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"dia 140mm","offer_id":41960198766752,"sku":"","price":579.99,"currency_code":"EUR","in_stock":true},{"title":"dia 160mm","offer_id":41960198865056,"sku":"","price":579.99,"currency_code":"EUR","in_stock":true},{"title":"d 180mm","offer_id":41960199225504,"sku":"","price":579.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/uni-schaelgeraet_6efbe9d6-e889-4b6d-9099-6d16514d5201.jpg?v=1683833004"},{"product_id":"rotationsschalgerat-63-d-25-bis-d-63","title":"Rotary peeling tool RS63 (d 20 to d 63)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Scraper RS 63\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP rotary scraper is ideal for the mechanical processing of surfaces of PE\/PP plastic pipes, for example during electrofusion welding. The RS rotary scraper offers excellent scraping results, \u003cspan data-mce-fragment=\"1\"\u003efast feed adjustment, ovality compensation, and flat spot compensation\u003c\/span\u003e. Handy and reliable.\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 20 to d 63\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003eAdaptation to possible pipe tolerances\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupplied in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePackaging dimensions: 275×230×85 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 1.3 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003etransport case and spare blade \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":41960210923680,"sku":"","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/Rotationsschaelgeraet_600x600_8ad276d8-bbc0-490a-8820-8717ba245e15.jpg?v=1649677808"},{"product_id":"ersatzmesser-typ-1-fur-uni-und-rotationsschalgerate-rs-125-225-315","title":"Replacement blades for RS 125\/225\/315","description":"\u003cp class=\"Polaris-Header-Title_2qj8j\"\u003eReplacement Blade Type 1 for UNI and Rotary Stripping Tools RS 125\/225\/315\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003esuitable for:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRS 315 CPT2 (yellow)\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRS 125, RS 225 RST2 (black)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUNI stripping tools d 63 - d 180 RST2 (black)\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":41961610707104,"sku":"","price":61.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/ersatzklinge_rotationsschaelgeraet_kl579b28dd8496d.jpg?v=1649849850"},{"product_id":"rotationsschalgerat-rs-125-d-20-bis-d-125","title":"Rotary peeling tool RS125 (d 20 to d 125)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Scraper RS 125\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eOur PE\/PP rotary scraper is ideal for the mechanical preparation of surfaces of PE\/PP plastic pipes, for example during electrofusion welding. The RS rotary scraper offers excellent scraping results, \u003cspan data-mce-fragment=\"1\"\u003efast feed adjustment, ovality compensation, and compensation for flat spots\u003c\/span\u003e. Handy and reliable.\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 20 to d 125\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003esmall swivel radius for working in trenches and confined spaces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAdaptation to possible pipe tolerances\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupplied in a practical carrying case\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003esuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePackaging dimensions: 275×230×85 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 1.6 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003ecarrying case and spare blade\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":41961619751072,"sku":"","price":789.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/Rotationsschaelgeraet_600x600_5adbcd11-e707-4f88-b237-e2960e5ef2c3.jpg?v=1713469343"},{"product_id":"stutzenschalgerat-pes-63-set-sdr11","title":"Stub pipe cutter set","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe branch pipe peeler PES 63 covers the dimension range d 32 to 63 mm. Adjustment is made using the diameter-specific plug-in adapters and simple adjustment of the blade arm. It is suitable for preparing pipe ends, pipe branches, and connection branches of tapping saddles and tapping valves.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eFor mechanical surface treatment of PE plastic pipes\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eRobust basic device made of metal\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 32\/40\/50\/63 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003ePES 63 set consisting of basic device, plastic stopper, socket wrench, operating instructions and transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":41961638625440,"sku":"","price":645.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/PB-907563.webp?v=1649854762"},{"product_id":"pe-pp-schaelgeraet-pes-200","title":"PE\/PP Peeling Tool PES 200","description":"\u003cp\u003ePE Scraping Tool PES 200 from d 63 mm (SDR 11) to d 200 mm (SDR 17)\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor mechanical surface preparation of PE\/PP plastic pipes during electrofusion welding.\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery: Scraping tool PES, spare blade, operating instructions and transport case.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":41961682960544,"sku":"","price":745.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/Schaelgraet_pes.jpg?v=1761211088"},{"product_id":"kunststoffstopfen-32mm-63mm-fur-pes63","title":"Plastic stopper 32mm - 63mm for PES63","description":"Plastic plug 32mm - 63mm for PES 63","brand":"Frank GmbH","offers":[{"title":"32mm","offer_id":41966723137696,"sku":"","price":65.99,"currency_code":"EUR","in_stock":true},{"title":"40mm","offer_id":41966729003168,"sku":"","price":75.99,"currency_code":"EUR","in_stock":true},{"title":"50mm","offer_id":41966736244896,"sku":"","price":85.99,"currency_code":"EUR","in_stock":true},{"title":"63mm","offer_id":41966739882144,"sku":"","price":100.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/PE-Schweisstechnik_1_b6adcdf3-4542-4e29-a977-f8a652c58fca.png?v=1650476231"},{"product_id":"widos-4400-stumpfschweissmaschine","title":"WIDOS 4400 Heating Element Butt Welding Machine incl. Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4400 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS 4400 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 50 to DA 160. The WIDOS 4400 has a double clamping device with quick clamping on both the fixed and movable sides. This is guided on 2 shafts. The machine has 2 flexible hoses with quick couplings for connection to the hydraulic control unit. The double clamping device is bolted to the steel tube underframe. The outer fixed clamping element can be easily removed by loosening 3 screws to allow welding in hard-to-reach places, e.g. in manholes or on the branch side of T-pieces. By removing it from the underframe, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4400 is therefore a 4-ring and a 3-ring machine in one.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS 4400 can be used on construction sites and in trenches. Pipes and fittings from DA 50 to DA 160 can be processed. The outer fixed clamping element of the WIDOS 4400 can be easily removed by loosening 3 screws to allow welding in hard-to-reach places. By removing it from the underframe, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends, thus allowing for easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a post-pressure device to support the joining force during the cooling time and 2 quick couplings as well as a digital manometer for exact pressure display. The planer has a chain drive in a closed aluminum housing. The planer blades used are ground on both sides and can therefore be used multiple times. The heating element is non-stick coated and has electronic temperature control with digital display. A storage box is available for heat-protected storage of the heating element and for hanging the planer. The WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021725896864,"sku":"","price":8595.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/WIDOS4400STUMPFSCHWEISSEN_4.png?v=1761208455"},{"product_id":"widos-4600-stumpfschweissmaschine","title":"WIDOS 4600 Heating Element Butt Welding Machine with Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4600 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cbr\u003e\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4600 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 75 to DA 250. The WIDOS 4600 has a double clamping device with quick clamping on both the fixed and movable sides. This is guided on 2 shafts. For connection to the hydraulic control unit, there are 2 flexible hoses with quick couplings on the machine. The double clamping device is bolted to the steel tube undercarriage. The outer fixed clamping element can be easily removed by loosening 3 screws in order to weld in hard-to-reach places, e.g. in manholes or on the branch side of T-pieces. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4600 is thus a 4-ring and a 3-ring machine in one.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4600 can be used on construction sites and in trenches. Pipes and fittings from DA 75 to DA 250 can be processed. The outer fixed clamping element of the WIDOS 4600 can be easily removed by loosening 3 screws in order to weld in hard-to-reach places. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends and thus enables easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a push-back device to support the joining force during the cooling time, 2 quick couplings and a digital manometer for precise pressure display. The facing tool has a chain drive in a closed aluminum housing. The facing tool blades used are ground on both sides and can therefore be used multiple times.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe heating element is non-stick coated and has electronic temperature control with digital display. A setting box is available for heat-protected storage of the heating element and for hanging the facing tool. WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021728944288,"sku":"","price":9895.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/heizelement.stumpfschweissmaschine-widos4600.png?v=1761208679"},{"product_id":"widos-4900-stumpfschweissmaschine","title":"WIDOS 4900 Heating Element Butt Welding Machine incl. Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4900 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4900 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 90 to DA 315. The WIDOS 4900 has a double clamping device with quick clamping on the fixed and movable sides. This is guided on 2 shafts. For connection to the hydraulic control unit, there are 2 flexible hoses with quick couplings on the machine. The double clamping device is bolted to the steel pipe frame. The outer fixed clamping element can be easily removed by loosening 3 screws to allow welding in hard-to-reach places, e.g. in a shaft or on the branch side of a T-piece. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4900 is thus a 4-ring and a 3-ring machine in one.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4900 can be used on construction sites and in trenches. Pipes and fittings from DA 90 to DA 315 can be processed. The outer fixed clamping element of the WIDOS 4900 can be easily removed by loosening 3 screws to allow welding in hard-to-reach places. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends, thus enabling easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a post-pressure device to support the joining force during the cooling time and 2 quick couplings as well as a digital manometer for precise pressure display. The planer has a chain drive in a closed aluminum housing. The planer blades used are ground on both sides and can therefore be used multiple times.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe heating element is non-stick coated and has electronic temperature control with digital display. An adjustment box is available for heat-protected storage of the heating element and for hanging the planer. WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021756993696,"sku":"","price":11195.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/WIDOS-4911-blau_506aed28-27b1-4062-bf6c-d3b19b0a293c.png?v=1761208389"},{"product_id":"roweld-p200-b","title":"ROWELD P200 B","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice on request! Please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHydraulic butt welding machine Ø 63 - 200mm. The selection of durable components ensures a low-maintenance, robust and reliable operation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe ROWELD Hydraulics Type Professional with stepless pressure adjustment, easy-to-read manometer, and pressure accumulator is suitable for welding according to DVS and other internationally valid directives and standards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"px-4\"\u003e\n\n\u003cli class=\"py-2\"\u003eEasy to use\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eRobust\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eFlexible application\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eParticularly torsion-resistant, weight-optimized frame\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eSafe\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"flex flex-row flex-wrap -mx-grid mb-8\"\u003e\n\n\u003cdiv class=\"w-full lg:w-3\/4\"\u003e\n\n\u003ctable class=\"w-full table-auto\"\u003e\n\n\u003ctbody class=\"text-sm leading-6 align-baseline\"\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eInput power\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e2 kW\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eVoltage\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e220 - 240 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eWorking range diameter in mm\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e63 - 200 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eMains plug type\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003ePlug Type F (CEE 7\/4)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eMains frequency\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"flex flex-row flex-wrap -mx-grid\"\u003e\n\n\u003cdiv class=\"w-full lg:w-1\/4 px-grid\"\u003e\n\n\u003ctable class=\"w-full table-auto\"\u003e\n\n\u003ctbody class=\"text-sm leading-6 align-baseline\"\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eLength x Width x Height\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e120,000 X 80,000 X 75,000 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eNet weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eGross weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Length\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e120 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Width\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e80 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eShipping weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Height\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e75 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Rothenberger GmbH","offers":[{"title":"Default Title","offer_id":42021870993568,"sku":"","price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/2707_ROWELDP630BProfessionalBasicSet400V50Hz-Mainimage-3832.jpg?v=1761207989"},{"product_id":"heizwendelschweissgerat-zeen-3000-plus-d-20-1200mm","title":"Electrofusion Welding Unit ZEEN-3000 PLUS d 20 - 1200mm","description":"\u003cp\u003e\u003cstrong\u003eElectrofusion Welding Machine \"ZEEN-3000 PLUS\" incl. Adapter and optional Scanner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe professional powerhouse - our \"largest\" electrofusion welding machine is a true all-rounder and master of all trades!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZEEN 3000 PLUS electrofusion welding machine is a versatile \u003ca href=\"https:\/\/peschweisstechnik.de\/collections\/heizwendelschweissgeraete\"\u003eelectrofusion welding machine\u003c\/a\u003e suitable for welding all electrofusion fittings up to a diameter of d 1200 mm. The operator works with a safety voltage of less than 50 volts. The device supports all electrofusion sockets up to d 1200 mm. The ZEEN 3000 PLUS impresses with its simple and clear operation of the control program, \u003cspan\u003ean electronic control system that reacts in real-time to changes in performance parameters, as well as automatic adjustment of the welding time depending on the ambient temperature. The device stores data from up to 3000 welds. Welding reports can be read out via the USB interface, the welder's firmware can be updated, or a printer can be connected for immediate printing of the reports. \u003c\/span\u003eThe machine is manufactured in Poland according to current standards. The optional annual calibration can be carried out by us cost-effectively if required. We will gladly send you further information upon request!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003erobust and durable electrofusion welding machine for tough construction site use\u003c\/li\u003e\n\n\u003cli\u003eRange: electrofusion fittings with a diameter of up to 1200 mm\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eis naturally delivered calibrated and \u003cspan\u003eaccording to DVS 2207\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eRecording of welding parameters (up to 3000 welding reports)\u003c\/li\u003e\n\n\u003cli\u003eReading out data via USB port with the possibility to print the report\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003esimple, self-explanatory operation\u003c\/li\u003e\n\n\u003cli\u003evisual and acoustic signaling of the welding process\u003c\/li\u003e\n\n\u003cli\u003eOperating voltage: 8 V to 48 V\u003c\/li\u003e\n\n\u003cli\u003eInput of welding data using the keyboard or automatic input of welding data via barcode scanner according to \u003cspan\u003eISO 13950\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\"Repeat mode\" - automatic programming when using the settings of the last welding process\u003c\/li\u003e\n\n\u003cli\u003eincl. \u003cspan\u003etraceability function\u003c\/span\u003e (ISO 12176-3 \/ ISO 12176-4)\u003c\/li\u003e\n\n\u003cli\u003ewith the option to connect an external GPS antenna\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical consultation is possible via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Electrofusion welding machine, scanner of your choice, transport box, adapter 4 mm, 4.7 mm\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eCalibration according to DVS 2207 Standard\u003c\/p\u003e\n\u003cp\u003eDiameter: 20\u003cspan\u003e-1200 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoltage: 230 V \/ 50Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e5000\u003c\/span\u003e\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 21 Kilograms\u003c\/p\u003e\n\u003cp\u003eWelding Voltage: \u003cspan\u003e8-48 V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory: up to 3000 welding reports\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtection Class: IP54\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDimensions: 270x260x330 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Generator: 6 Kilowatts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable Operating Languages: PL, ENG, RU, GER, HU, FR, RO, NO, IT, RO, LT, ESP, CZ, SK\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePorts: USB Type A, USB Type B, M12\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"without a scanner","offer_id":53696123732236,"sku":"","price":1999.99,"currency_code":"EUR","in_stock":true},{"title":"Scanner with Cable - Honeywell","offer_id":53696123765004,"sku":"","price":2099.99,"currency_code":"EUR","in_stock":true},{"title":"Scanner Cordless - Wireless NT 1100 LW","offer_id":53696123797772,"sku":"","price":2099.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/ZEEN-3000-PLUS_Heizwendelschweissgeraet.png?v=1761207885"},{"product_id":"rotationsschalgerat-rs225-d-63-bis-d-225","title":"Rotational peeling tool RS225 (d 63 to d 225)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Scraper RS 225\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP rotary scraper is ideal for the mechanical preparation of the surfaces of PE\/PP plastic pipes, for example, during electrofusion welding. The RS rotary scraper offers excellent scraping results, \u003cspan data-mce-fragment=\"1\"\u003efast feed adjustment, ovality compensation, and flat spot compensation\u003c\/span\u003e. Handy and reliable.\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 63 to d 225\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003eAdaptation to possible pipe tolerances\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupplied in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePackaging dimensions: 440×360×140 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 4 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary scraper including transport case and spare blades.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":44304333897996,"sku":"","price":1069.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/Rotationsschaelgeraet_600x600_21bdebb0-1dd2-4841-bd2e-6c323db3dc69.jpg?v=1679057528"},{"product_id":"kunststoff-schaelgeraet-turbo-d-20-63-mm","title":"Plastic scraping tool \"Turbo\" for pipes 20 - 63 mm","description":"\u003cp\u003eOur best-selling plastic scraping tool provides the simplest, yet most precise and fastest solution for preparing pipe ends for socket, butt, and electrofusion welding.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ritmo patented \"Turbo\" PE scraping tool is now available as a set and offers the following advantages:\u003c\/p\u003e\n\u003cp\u003e- professional rotary scraping tool for facing and scraping PE plastic pipes\u003c\/p\u003e\n\u003cp\u003e- easy handling in conjunction with any professional cordless drill\u003c\/p\u003e\n\u003cp\u003e- significant time savings due to fast and precise execution\u003c\/p\u003e\n\u003cp\u003e- designed for working in confined spaces\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAvailable individually or in a set with the following sizes: d20, d25, d32, d40, d50, d63\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"d 20","offer_id":45446047990028,"sku":"","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"d 25","offer_id":45446048022796,"sku":"","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"d 32","offer_id":45446048055564,"sku":"","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"d 40","offer_id":45446048088332,"sku":"","price":149.95,"currency_code":"EUR","in_stock":true},{"title":"d50","offer_id":45446048121100,"sku":"","price":149.95,"currency_code":"EUR","in_stock":true},{"title":"d63","offer_id":45446048153868,"sku":"","price":149.95,"currency_code":"EUR","in_stock":true},{"title":"d 20 - 63 mm SET","offer_id":45446048186636,"sku":"","price":779.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/turbo-schaeler-schaelgeraet-Turboscraper.jpg?v=1761211039"},{"product_id":"rotationsschalgerat-rs315-d-90-bis-d-315","title":"Rotary Peeling Tool RS315 (d 90 to d 315)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Scraper RS 315\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP rotary scraper is ideal for mechanically preparing the surfaces of PE\/PP plastic pipes, for example during electrofusion welding. The RS rotary scraper offers excellent scraping results, \u003cspan data-mce-fragment=\"1\"\u003efast feed adjustment, ovality compensation, and flat spot compensation\u003c\/span\u003e. Handy and reliable.\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 90 to d 315\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003eAdaptation to possible pipe tolerances\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupplied in a practical carrying case\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePackage dimensions: 450×360×150 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 5.4 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003ecarrying case and spare blade \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Frank GmbH","offers":[{"title":"Default Title","offer_id":45415598129420,"sku":null,"price":1269.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rotationsschaelgeraet_600x600_21bdebb0-1dd2-4841-bd2e-6c323db3dc69.jpg?v=1712927300"},{"product_id":"rollenbock-pprn-d-160-500-mm-fur-pe-pp-pvdf-rohre","title":"Roller stand PPRN for 160 - 500 mm PE\/PP\/PVDF pipes","description":"\u003cdiv\u003e\u003cstrong\u003eRoller stand \/ Pipe laying stand PPRN d 160 - 500 mm for PE\/PP\/PVDF pipes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMove pipes during butt welding without much effort? We make pipe laying easy!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOur height-adjustable roller stand PPRN is characterized by its simple but well-thought-out system. The stable welded steel construction is guaranteed to be robust, durable and suitable for all pipes and construction sites.\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003estable base plate for sinking protection\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eheight adjustable in all versions\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eDust and dirt protected bearings\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003efor pipes up to d 500 mm\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eDesign depends on size - see photo\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the roller stand on request! \u003c\/strong\u003e\u003c\/p\u003e","brand":"Nowatech","offers":[{"title":"d 160 mm","offer_id":53794899722508,"sku":"","price":74.2,"currency_code":"EUR","in_stock":true},{"title":"d 250 mm","offer_id":53794899755276,"sku":"","price":126.0,"currency_code":"EUR","in_stock":true},{"title":"ø 315 mm","offer_id":53794899788044,"sku":"","price":130.2,"currency_code":"EUR","in_stock":true},{"title":"ø 400 mm","offer_id":53794899820812,"sku":"","price":266.0,"currency_code":"EUR","in_stock":true},{"title":"d 500 mm","offer_id":53794899853580,"sku":"","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rollenbock_PRRN_315.png?v=1732014970"},{"product_id":"rollenbock-pprnp-d-400-1200-mm-fur-pe-pp-pvdf-rohre","title":"Pipe Roller Support PPRNP d 630 - 1200 mm for PE\/PP\/PVDF Pipes","description":"\u003cdiv\u003e\u003cstrong\u003eRoller stand \/ Pipe laying stand PPRNP d 630 - 1200 mm for PE\/PP\/PVDF pipes\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMove pipes during butt welding without much effort? We make pipe laying easy!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOur PPRNP roller stand is characterized by its simple yet sophisticated system. The sturdy welded steel construction is guaranteed robust, durable, and suitable for all pipes and construction sites. The \"630 mm\" model is not adjustable; all other models are adjustable, see photo.\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eStable base plate as anti-sink protection\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eDust and dirt protected bearing\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eFor pipes up to d 1200 mm\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eDesign depends on size - see photo\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the roller stand upon request! \u003c\/strong\u003e\u003c\/p\u003e","brand":"Nowatech","offers":[{"title":"d 630 mm","offer_id":53794956116236,"sku":"","price":247.0,"currency_code":"EUR","in_stock":true},{"title":"Ø 800 mm","offer_id":53794956149004,"sku":"","price":332.0,"currency_code":"EUR","in_stock":true},{"title":"D 1000 mm","offer_id":53794956181772,"sku":"","price":455.0,"currency_code":"EUR","in_stock":true},{"title":"Ø 1200 mm","offer_id":53794956214540,"sku":"","price":494.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rollenbock_PRRN-630P_1.png?v=1761208103"},{"product_id":"rotationsschalgerat-rs63-d-20-bis-d-63","title":"Pipe Cutter RS225 (d 63 to d 225)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Pipe Cutter RS225\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eThe RS pipe cutter offers a \u003cspan data-mce-fragment=\"1\"\u003eclean cut\u003c\/span\u003e, \u003cspan data-mce-fragment=\"1\"\u003equick adjustment and a reversible blade for increased durability\u003c\/span\u003e. It is easy to use and reliable in operation due to its solid construction - whether on the construction site or in the workshop.\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 63 to d 225mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall swing radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupplied in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eCutting depth: 32 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for material: PE, PE-HD, PE-X, PP\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePackaging dimensions: 450×245×90 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 3.8 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Pipe cutter and transport case\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":45461940011276,"sku":null,"price":1150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rohrschneider.jpg?v=1761207901"},{"product_id":"rohrschneider-rs315-d-90-bis-d-315","title":"Pipe cutter RS315 (d 90 to d 315)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Rotary Pipe Cutter \u003c\/strong\u003e\u003cstrong\u003eRS315\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eThe RS pipe cutter offers a \u003cspan data-mce-fragment=\"1\"\u003eclean cut\u003c\/span\u003e, \u003cspan data-mce-fragment=\"1\"\u003equick adjustment and a reversible blade for increased durability\u003c\/span\u003e. It is easy to use and reliable due to its solid construction - whether on the construction site or in the workshop.\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 90 to d 315mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esupplied in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ecutting depth: 32 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for material: PE, PE-HD, PE-X, PP\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003epackaging dimensions: 450×350×140 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eweight: 5 kg\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: pipe cutter and transport case\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":45469332963596,"sku":null,"price":1269.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rohrschneider_d732e076-f8d3-4399-bee6-0eee907a728c.jpg?v=1761208345"},{"product_id":"schaelgerat-calderprep-plus","title":"Calderprep Plus peeling tool d 20 - 63 mm","description":"\u003cp\u003e\u003cstrong\u003eCalderprep Plus peeling tool - simple and robust peeling tool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP rotary peeling tool is the economical alternative to the \"Turbo\" peeling tool and is ideal for preparing the pipe ends of PE\/PP plastic pipes. It impresses with its robust and durable construction, very good peeling results, and its unbeatable price-performance ratio. The Calderprep Plus rotary peeling tool always peels 100%, compensates for pipe ovalities, and can be operated manually or with a conventional cordless drill.\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan class=\"VIpgJd-yAWNEb-VIpgJd-fmcmS-sn54Q\"\u003eMulti-tool in a set with interchangeable mandrel inserts\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003ecan be used manually or with a cordless drill\u003cspan\u003e\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003ecan prepare PE pipe ends in less than 30 seconds\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003esuitable for pipe diameters d 20 to d 63 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003every small swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ealways peels 100% of the surface\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDelivered in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary peeling tool including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003etransport case, mandrel inserts d 32 - 63 mm, d 20 and 25 mm only upon selection\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"OD 20 - 63 mm","offer_id":54138179387660,"sku":"","price":545.99,"currency_code":"EUR","in_stock":true},{"title":"d 25 - d 63 mm","offer_id":54138179420428,"sku":"","price":525.99,"currency_code":"EUR","in_stock":true},{"title":"d 32 - 63 mm","offer_id":54138179453196,"sku":"","price":495.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/SchaelgeraetCalderprepplus.jpg?v=1714081379"},{"product_id":"schaelgerat-uniprep-4-d-63-250-mm","title":"Stripping tool Uniprep 4 d 63 - 250 mm","description":"\u003cp\u003e\u003cstrong\u003eUniprep 4 Rotary Scraper\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP rotary scraper is ideal for preparing the ends of PE\/PP plastic pipes. It is very easy to use, features a spring-loaded scraping tip for irregularly shaped pipes, and offers excellent performance characteristics. With the Uniprep 4, you will work professionally, for a long time, and reliably!\n\n\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan class=\"\"\u003elightweight die-cast aluminum housing\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan class=\"VIpgJd-yAWNEb-VIpgJd-fmcmS-sn54Q\"\u003e4-sided tungsten blade\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSpring-loaded tip for irregularly shaped pipes\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSuitable for all SDR pipes\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e130 mm scraper length\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003efor pipe diameters d 63 to d 250\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDelivered in a practical transport case\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Rotary scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003etransport case\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e","brand":"Caldertech","offers":[{"title":"Default Title","offer_id":45486237450508,"sku":"","price":799.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Schaelgeraet-Uniprep4_2.jpg?v=1714081699"},{"product_id":"hydraulische-stumpfschweissmaschine-zhcn-160-cnc-im-set","title":"Butt welding machine ZHCN 160 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 160 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC-controlled welding machine (DVS 2207 compliant) including clamping inserts (either steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for recording \/ documenting welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in a diameter range of 50 - 160 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC our bestseller among butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert or remove the facer and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality joints are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. The machine can be operated in German, English, Russian, and Polish. It is possible to connect an external GPS antenna. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, enabling precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by adapting the pressures and progressing through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick, automatic removal of the heating element between the pipes, thereby reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Parameter Registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 104 Kilograms\u003c\/p\u003e\u003c!--nl--\"\u003e\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 50 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 22kg","offer_id":53626405323020,"sku":"","price":7085.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 14KG","offer_id":53626405355788,"sku":"","price":7455.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschine_ZHCN-160CNC.png?v=1761207840"},{"product_id":"stumpfschweissmaschine-zhcn-250-cnc-im-set","title":"Butt Welding Machine ZHCN 250 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 250 - CNC in Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 63 - 250 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC a bestseller among our butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert and remove the facer and heating element upon the machine's signal. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections can be achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's certification for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, enabling precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by modifying pressures and progressing through subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick automatic removal of the heating element between the pipes, thus reducing the changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Parameter Registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine, as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e63-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3650 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 121 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 5\u003cspan\u003e50 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 52 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 68KG","offer_id":53626560053516,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53626560086284,"sku":"","price":8715.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschineZHCN-250CNC.png?v=1761208295"},{"product_id":"stumpfschweissmaschine-zhcn-315-cnc-im-set","title":"Butt Welding Machine ZHCN 315 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 315 - CNC in Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC-controlled welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 90 - 315 mm. Its unbeatable price-performance ratio, robust design, and ease of use make the ZHCN - CNC a bestseller among our butt welding machines. With CNC-controlled machines, the operator is not required to set the necessary pressure or control the movement of the pipes. The operator's only task is to mount the pipes, insert and remove the facing tool and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information is available upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME position sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that monitors the pipe's position, allowing for precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by regulating pressures and moving through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoval of the heating element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with an automatic heating element removal system, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, facing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e90-315 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3850 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 134 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 5\u003cspan\u003e50 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 52 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53626571653388,"sku":"","price":8815.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping inserts made of aluminum - 38KG","offer_id":53626571686156,"sku":"","price":9445.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschine_ZHCN-315CNC.png?v=1761208236"},{"product_id":"stumpfschweissmaschine-zhcn-500-rcnc-im-set","title":"Butt Welding Machine ZHCN 400 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 400 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or steel (optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for recording\/documenting welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 110 - 400 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC our bestseller among butt welding machines. With CNC controlled machines, the operator is not required to set the necessary pressure or control the movement of the pipes. The operator's only task is to mount the pipes, and insert or remove the facing tool and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections can be achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information is available upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME position sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that monitors the pipe's position, allowing for precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts pressures accordingly, progressing through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating element removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with an automatic heating element removal system, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding parameter registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, facing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eGeneral Technical Data:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 110\u003cspan\u003e-400 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e4950W\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 214 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 550\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 52 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 111KG","offer_id":53747709214988,"sku":"","price":12035.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 55KG","offer_id":53747709247756,"sku":"","price":13045.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet-heizelement_Stumpfschweissen_ZHCN-400CNC.png?v=1761208138"},{"product_id":"stumpfschweissmaschine-zrcn-160-im-set","title":"Butt Welding Machine ZRCN 160","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZRCN 160 for the small budget\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003emanual butt welding machine ZRCN 160 without hydraulic unit - including clamping inserts (steel or aluminium optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZRCN type welding machine is a powerful yet handy, reliable and easy to transport butt welding machine for welding plastic pipes (PE, PP, PVDF) with diameters from 50 mm to 160 mm. The ZRCN type welding machine is most commonly used for connecting protective pipes for the energy and telecommunications industries, as well as for welding downpipes and air conditioning ducts. The machine is equipped with a manual gearbox that allows you to achieve the desired pressing force. The force is measured with a spring force gauge. The welding machine is operated according to the welding parameter table. The timer is integrated into the handle of the heating element.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating element with controller in the handle:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heating element is controlled by a controller integrated in the handle, and the temperature is set using function keys on the control panel. The controller has an additional timer function to ensure an overview of individual welding processes.\u003c\/p\u003e\n\u003cp\u003eThe machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral technical data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e2200 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 48 Kilograms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts","offer_id":53628533047564,"sku":null,"price":3250.0,"currency_code":"EUR","in_stock":true},{"title":"Aluminium clamping inserts","offer_id":53628533080332,"sku":"","price":3450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizelement_Stumpfschweissmaschine_zrcn_160.png?v=1761208724"},{"product_id":"stumpfschweissmaschine-zhcn-160-e","title":"Butt Welding Machine ZHCN 160 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 160 - E in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (optionally steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from \u003c\/span\u003e50–160 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, which has a permanently installed recording device that allows control of the welding machine as well as monitoring and display of the performed activities thanks to the messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Semi-Automatic Welding Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows partial automation of certain activities, such as the automatic movement of the carriage when removing the heating element or lowering the pressure during the welding phase. Here, valuable time is saved on the construction site and operator errors are minimized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled via the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support bracket, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 99 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 Welding Protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 22kg","offer_id":53628659073292,"sku":"","price":6295.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum Clamping Inserts - 14KG","offer_id":53628659106060,"sku":null,"price":6665.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-160E.png?v=1761208074"},{"product_id":"stumpfschweissmaschine-zhcn-250-e","title":"Butt Welding Machine ZHCN 250 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 250 - E in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (either steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters of 63\u003c\/span\u003e–250 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, enabling control of the welding machine as well as monitoring and display of the performed activities thanks to messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the welding is performed professionally and cleanly. This prevents the welder, for example, from not adhering to the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows for partial automation of certain tasks, such as automatic movement of the carriage when removing the heating element or lowering the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical consultation is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 63\u003cspan\u003e-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3650 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 116 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel Clamping Inserts - 68 KG","offer_id":53628724642060,"sku":"","price":7345.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53628724674828,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-250E.png?v=1761208628"},{"product_id":"stumpfschweissmaschine-zhcn-315-e","title":"Butt Welding Machine ZHCN 315 - E","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine ZHCN 315 - E in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum, optionally)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 90\u003c\/span\u003e–315 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, which has a permanently installed recording device that allows control of the welding machine as well as monitoring and display of the performed activities thanks to messages shown on the display. The control program monitors the operator and prevents them from making errors (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information will be gladly sent to you upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStandardly, ZHCN-E welding machines operate in semi-automatic mode and guide the operator step by step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not adhering to the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain activities, such as automatic retraction and advance of the carriage when removing the heating element or pressure reduction during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN heating element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 90\u003cspan\u003e-315\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3850 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 129 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53628731949324,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping Inserts Made of Aluminum - 38KG","offer_id":53628731982092,"sku":"","price":8715.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-315E.png?v=1761208545"},{"product_id":"stumpfschweissmaschine-zhcn-630-e","title":"Butt Welding Machine ZHCN 630 - E","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine ZHCN 630 - E in set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or optionally without\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of the type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters of 355\u003c\/span\u003e–630 mm\u003cspan\u003e . All components of the device are controlled by the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e , in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the performed activities thanks to the messages displayed on the screen. The control program monitors the operator and prevents them from making mistakes (e.g. incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e The machine can be operated in German, English, Russian and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode and guide the operator step by step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain activities, such as the automatic retraction and advance of the carriage when removing the heating element or the lowering of the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 355\u003cspan\u003e-630\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: 8650\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 720 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 750\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 Welding Protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 50 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"incl. aluminum clamping inserts - 180KG","offer_id":53747616743692,"sku":"","price":19400.0,"currency_code":"EUR","in_stock":true},{"title":"without chip inserts","offer_id":53747616776460,"sku":"","price":13400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_ZHCN-630E.png?v=1761208742"},{"product_id":"heizwendelschweissgerat-zeen-2000-d-20-400mm","title":"Electrofusion Welding Machine ZEEN-2000 d 20 - 400mm","description":"\u003cp\u003e\u003cstrong\u003eElectrofusion Welding Machine \"ZEEN-2000\" incl. adapter and optional scanner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDespite its unbeatable price-performance ratio, our new bestseller among electrofusion welding machines is in no way inferior to its competitors - electrofusion welding according to DVS 2207 with the ZEEN-2000! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZEEN 2000 electrofusion welding machine is a versatile \u003ca href=\"https:\/\/peschweisstechnik.de\/collections\/heizwendelschweissgeraete\"\u003eelectrofusion welding machine\u003c\/a\u003e suitable for welding all electrofusion fittings up to a diameter of d 400 mm. The operator works at a safety voltage of less than 50 volts. The device supports all electrofusion sockets up to d 400 mm. The ZEEN 2000 convinces with its simple and clear operation of the control program, an electronic control system that reacts in real time to changes in performance parameters, as well as the automatic adjustment of the welding time depending on the ambient temperature. The device stores data from up to 3000 welds. Welding protocols can be read out via the USB interface, the welding machine's firmware can be updated, or a printer can be connected for immediate printing of the protocols. The machine is manufactured in Poland according to current standards. The optional annual calibration can be carried out by us at a low cost if required. Further information will be sent to you upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eRobust and durable electrofusion welding machine for tough construction site use\u003c\/li\u003e\n\n\u003cli\u003eRange: Electrofusion fittings with a diameter of up to 400 mm\u003c\/li\u003e\n\n\u003cli\u003eSupplied calibrated and according to DVS 2207\u003c\/li\u003e\n\n\u003cli\u003eRecording of welding parameters (up to 3000 welding protocols)\u003c\/li\u003e\n\n\u003cli\u003eData readout via USB connection with the possibility to print the protocol\u003c\/li\u003e\n\n\u003cli\u003eSimple, self-explanatory operation\u003c\/li\u003e\n\n\u003cli\u003eOptical and acoustic signaling of the welding process\u003c\/li\u003e\n\n\u003cli\u003eOperating voltage: 8 V to 48 V\u003c\/li\u003e\n\n\u003cli\u003eInput of welding data using the keyboard or automatic input of welding data via barcode scanner according to \u003cspan\u003eISO 13950\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\"Repeat mode\" - automatic programming using the settings of the last welding process\u003c\/li\u003e\n\n\u003cli\u003eIncl. \u003cspan\u003etraceability function\u003c\/span\u003e (ISO 12176-3 \/ ISO 12176-4)\u003c\/li\u003e\n\n\u003cli\u003eWith possibility to connect an external GPS antenna\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Electrofusion welding machine, scanner of choice, transport box, adapter 4 mm, 4.7 mm\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eCalibration according to DVS 2207 Standard\u003c\/p\u003e\n\u003cp\u003eDiameter: 20\u003cspan\u003e-400 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoltage: 230 V \/ 50Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3000 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 21 Kilograms\u003c\/p\u003e\n\u003cp\u003eWelding voltage: \u003cspan\u003e8-48 V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtection class: IP54\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDimensions: 430x280x180 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended generator: 5 Kilowatt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable operating languages: PL, ENG, RU, GER, HU, FR, RO, NO, IT, RO, LT, ESP, CZ, SK\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePorts: USB Type A, USB Type B, M12\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"without a scanner","offer_id":53629216817420,"sku":"","price":1399.99,"currency_code":"EUR","in_stock":true},{"title":"Scanner with Cable - Honeywell","offer_id":53629216850188,"sku":"","price":1499.99,"currency_code":"EUR","in_stock":true},{"title":"Scanner Wireless - Wireless NT 1100 LW","offer_id":53629216882956,"sku":"","price":1499.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizwendelschweissgeraet_ZEEN-2000PLUS.webp?v=1761208162"},{"product_id":"rohrschalgerat-zwun-d-32-bis-d-160-mm","title":"Pipe peeling tool ZWUN 160 (d 32 to d 160 mm)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Pipe Scraper ZWUN 160\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003eOur PE\/PP pipe scraper ZWUN was developed to support installers when welding electrofusion couplers. It is ideal for removing the oxide layer to prepare the outer surface of the pipe for electrofusion welding. The ZWUN pipe scraper offers excellent scraping results, \u003cspan data-mce-fragment=\"1\"\u003equick adjustment with a cordless drill, ovality compensation, and compensation for flat spots\u003c\/span\u003e. It is robust, handy, and reliable. Our scraper is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRobust and durable scraping tool for tough construction site use\u003cspan\u003e\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eFor pipe diameters d 32 to d 160 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cspan\u003eSmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eAdjustable with a cordless drill\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSupplied in a practical transport bag\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eSuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eDimensions: 30 x 24 x 10 cm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eMaximum stripping depth: 110 mm\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eWeight: 2.5 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003etransport bag\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical consultation is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e","brand":"Nowatech","offers":[{"title":"Default Title","offer_id":53629289365772,"sku":null,"price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rohrschaelgeraet_ZWUN-63.jpg?v=1761207974"},{"product_id":"rohrschaelgerat-zwun-400-d-63-bis-d-400-mm","title":"Pipe peeling tool ZWUN 400 (d 63 to d 400 mm)","description":"\u003cp\u003e\u003cstrong\u003eUniversal Pipe Scraper ZWUN 400\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eOur PE\/PP pipe scraper ZWUN was developed to assist fitters when welding electrofusion couplings. It is ideal for removing the oxide layer to prepare the outer surface of the pipe for electrofusion welding. The ZWUN pipe scraper offers an excellent scraping result, \u003cspan data-mce-fragment=\"1\"\u003equick adjustment by cordless drill, ovality compensation, and flat spot compensation\u003c\/span\u003e. It is robust, handy, and reliable. Our scraper is manufactured in Poland according to current standards. Further information is available on request!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eRobust and durable scraper for tough construction site use\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor pipe diameters d 63 to d 400 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmall swivel radius for working in trenches and confined areas\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAdjustable with a cordless drill\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupplied in a practical carrying bag\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for multiple pipe dimensions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 34 x 24 x 18 cm\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum stripping depth: 160 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 3.0 kilograms\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003eScope of delivery: Scraper including \u003c\/span\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003ecarrying bag\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-mark=\"1\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Nowatech","offers":[{"title":"Default Title","offer_id":53633095598348,"sku":null,"price":980.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Rohrschaelgeraet_ZWUN-400.jpg?v=1761208280"},{"product_id":"heizwendelschweissgerat-zeen-3000-d-20-500mm","title":"Electrofusion welding unit ZEEN-3000 d 20 - 500mm","description":"\u003cp\u003e\u003cstrong\u003eFusion welding machine \"ZEEN-3000\" incl. adapter and optional scanner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe professional powerhouse - our \"large\" electrofusion welding machine is even 3 kilos lighter, more compact and handier than its little brother ZEEN 2000!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZEEN 3000 electrofusion welding machine is a polyvalent fusion welding machine suitable for welding all electrofusion fittings up to 500 mm in diameter, and even up to 630 mm under appropriate conditions. The operator works at a safety voltage of less than 50 volts. The device supports all electrofusion sockets up to 500 mm in diameter. ZEEN 3000 impresses with its simple and clear operation of the control program, an electronic control system that reacts in real time to changes in power parameters, and automatic adjustment of the welding time depending on the ambient temperature. The device stores data from up to 3000 welds. Welding reports can be read out via the USB interface, the welder's firmware can be updated, or a printer can be connected for immediate printing of the reports. The machine is manufactured in Poland according to current standards. If required, you can have the optional annual calibration carried out by us at a reasonable cost. We will gladly send you further information upon request!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003erobust and durable fusion welding machine for tough construction site use\u003c\/li\u003e\n\n\u003cli\u003erange: electrofusion fittings with a diameter of up to 500 mm\u003c\/li\u003e\n\n\u003cli\u003ewelding up to 630 mm is possible under appropriate conditions\u003c\/li\u003e\n\n\u003cli\u003edelivered calibrated and in accordance with DVS 2207\u003c\/li\u003e\n\n\u003cli\u003erecording of welding parameters (up to 3000 welding reports)\u003c\/li\u003e\n\n\u003cli\u003edata readout via USB port with option to print the report\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003esimple, self-explanatory operation\u003c\/li\u003e\n\n\u003cli\u003evisual and acoustic signaling of the welding process\u003c\/li\u003e\n\n\u003cli\u003eoperating voltage: 8 V to 48 V\u003c\/li\u003e\n\n\u003cli\u003einput of welding data using the keyboard or automatic input of welding data via barcode scanner according to ISO 13950\n\n\u003c\/li\u003e\n\n\u003cli\u003e\"Repeat mode\" - automatic programming when using the settings of the last welding process\u003c\/li\u003e\n\n\u003cli\u003eincl. traceability function (ISO 12176-3 \/ ISO 12176-4)\u003c\/li\u003e\n\n\u003cli\u003ewith possibility to connect an external GPS antenna\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Fusion welding machine, scanner of choice, transport box, adapter 4 mm, 4.7 mm\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eCalibration according to DVS 2207 Standard\u003c\/p\u003e\n\u003cp\u003eDiameter: 20-500 (630) mm\u003c\/p\u003e\n\u003cp\u003eVoltage: 230 V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 3600 Watt\u003c\/p\u003e\n\u003cp\u003eTotal weight: 18 Kilograms\u003c\/p\u003e\n\u003cp\u003eWelding voltage: 8-48 V\u003c\/p\u003e\n\u003cp\u003eMemory: up to 3000 welding reports\u003c\/p\u003e\n\u003cp\u003eProtection class: IP54\u003c\/p\u003e\n\u003cp\u003eDimensions: 270x260x330 mm\u003c\/p\u003e\n\u003cp\u003eRecommended generator: 6 Kilowatts\u003c\/p\u003e\n\u003cp\u003eAvailable operating languages: PL, ENG, RU, GER, HU, FR, RO, NO, IT, RO, LT, ESP, CZ, SK\u003c\/p\u003e\n\u003cp\u003ePorts: USB Type A, USB Type B, M12\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"without a scanner","offer_id":53633120239884,"sku":null,"price":1699.99,"currency_code":"EUR","in_stock":true},{"title":"Scanner with Cable - Honeywell","offer_id":53633120272652,"sku":null,"price":1799.99,"currency_code":"EUR","in_stock":true},{"title":"Wireless Scanner - Wireless NT 1100 LW","offer_id":53633120305420,"sku":null,"price":1799.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Elektromuffenschweissgeraet_ZEEN-3000.png?v=1761208472"},{"product_id":"muffenschweissgeraet-zern-160-d-40-160mm","title":"Socket fusion welder ZERN-160 d 40 - 160mm","description":"\u003cp\u003e\u003cstrong\u003eSleeve welding machine \"ZERN-160\" including adapter and cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePractical and powerful sleeve welding machine for low-pressure pipes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eGeneral Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur ZERN-160 sleeve welding machine is used for welding electrofusion sleeves for PE pipes and fittings, in the low-pressure range of Ø40-160 mm. Manufacturers such as Akatherm-Euro, Coes, Geberit, Valsir, Waviduo, Vulcathene-Euro. The device automatically detects the connected fitting and selects the welding parameters. During welding, it provides acoustic and visual information about the welding process. The device is permanently installed in an impact-resistant plastic housing. The set with the welding machine includes a set of Ø2 tips for fittings from the above-mentioned manufacturers. \u003c\/span\u003eThe machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003erobust and durable sleeve welding machine for tough construction site use\u003c\/li\u003e\n\n\u003cli\u003eRange: Electrofusion fittings with a diameter of 40 to 160 mm in the low-pressure range\u003c\/li\u003e\n\n\u003cli\u003eautomatically detects fitting and selects parameters\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Sleeve welding machine including 3m cable, transport box\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 40\u003cspan\u003e-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoltage: 230 V \/ 50Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e1150 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":53656858362124,"sku":null,"price":499.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Muffenschweissgeraet_ZERN-160.png?v=1761208151"},{"product_id":"stumpfschweissgerat-zhcb-160","title":"Butt Welding Machine ZHCB 160","description":"\u003cp\u003e\u003cstrong\u003eZHCB 160 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum, optional) with the possibility of logging and operating assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 50 - 160 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timers and stopwatches for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. This new solution has reduced the machine's weight and dimensions by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine greatly simplifies the operation of the welder and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to activate the pump motor. This solution allows you to reduce the operating time of the generator and minimize possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down the times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The installation itself does not require additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a record\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be stored on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. You can find the device in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support brackets, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 98 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel Clamping Inserts - 22 KG","offer_id":53725786997004,"sku":"","price":5249.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping inserts made of aluminum - 14KG","offer_id":53725787029772,"sku":null,"price":5569.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_hydraulisch_ZHCB-160.png?v=1761208311"},{"product_id":"stumpfschweissgerat-zhcb-160-kopie","title":"Data Logger for Logging - RZEN 2000","description":"\u003cp\u003e\u003cstrong\u003eData logger for our butt welding machines ZHCB 160 - 1200\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur data logger guides the operator through the entire welding process, thereby reducing sources of error during welding and logging - DVS 2207 compliant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on-site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the machine from which a recording\/operating aid is currently needed. It is possible to connect an external GPS antenna for positioning. The data logger stores the parameters of up to 2,000 welds. The file (.pdf) with the welding protocols can be saved on a USB stick and printed directly from the welding machine with a thermal printer, or from a computer, with software that can be downloaded for free from the manufacturer's website.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Data logger and connection cable\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 4 weeks from order confirmation\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":53726008115468,"sku":null,"price":1095.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Datenlogger_RZEN-2000.png?v=1730746720"},{"product_id":"stumpfschweissgerat-zhcb-250","title":"Butt Welding Machine ZHCB 250","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCB 250 in a Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (either steel or aluminum) with the option of logging and operational assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHydraulic butt welding machines of type ZHCB are used for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 63 - 250 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust yet lightweight design. The welding machine is operated according to the welding parameter table. A timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the machine's weight and dimensions by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, thereby significantly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6, and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to actuate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the machine for which recording\/operational assistance is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for location tracking. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 63\u003cspan\u003e-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3470 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 115 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 29 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 68KG","offer_id":53726824759564,"sku":"","price":6195.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53726824792332,"sku":"","price":6925.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizelement-Stumpfschweissmaschine-ZHCB-250_stumpfschweissen.png?v=1761208206"},{"product_id":"stumpfschweissgerat-zhcb-315","title":"Butt Welding Machine ZHCB 315","description":"\u003cp\u003e\u003cstrong\u003eZHCB 315 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and Affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the possibility of logging and operating assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 90 - 315 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated using the welding parameter table. A timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger to professionally log according to DVS 2207. The data logger guides the operator through the entire welding process, thus greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will be happy to send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters placed on the front of the welding machine significantly facilitates the operation of the welding machine and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step by step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a recording \/ operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 90 \u003cspan\u003e-315 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3470 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 128 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53726850810124,"sku":"","price":6925.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 38KG","offer_id":53726850842892,"sku":"","price":7545.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/manuelle_Stumpfschweissmaschine_ZHCB-315.png?v=1761208589"},{"product_id":"stumpfschweissgeraet-zhcb-400","title":"Butt Welding Machine ZHCB 400","description":"\u003cp\u003e\u003cstrong\u003eZHCB 400 butt welding machine in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the possibility of logging and operating assistance through an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 110 - 400 mm without recording welding parameters, manually controlled. ZHCB - welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timers and the stopwatch for time measurement are integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for continuous pressure adjustment and pressure switching at maximum pressure. The new solution reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will be gladly sent upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB - butt welding machines are standardly equipped with a battery that maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the generator's operating time and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down the times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device from which a recording \/ operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for location tracking. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days after order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 110 \u003cspan\u003e- 400 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e4770 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 208 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 111KG","offer_id":53726858641676,"sku":"","price":10115.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 65KG","offer_id":53726858674444,"sku":"","price":11155.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/stumpfschweissgeraet-ZHCB-500CNC.png?v=1770075318"},{"product_id":"stumpfschweissgerat-zhcb-630","title":"Butt Welding Machine ZHCB 630","description":"\u003cp\u003e\u003cstrong\u003eZHCB 630 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the option of logging and operating assistance via an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type hydraulic butt welding machines are used for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 315 - 630 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will gladly be sent upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to activate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be carried out at any time on site. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a recording\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 315\u003cspan\u003e - 630 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: 8450\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 527 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 750\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 31 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Aluminum clamping inserts - 180KG","offer_id":53726862377228,"sku":"","price":17520.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet-Stumpfschweissmaschine_ZHCB-630.png?v=1761208433"},{"product_id":"stumpfschweissgerat-zhcb-1200","title":"Butt welding machine ZHCB 1200","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCB 1200 Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts with possibility for logging and operating assistance through an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHydraulic butt welding machines of type ZHCB are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 630 - 1200 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust yet lightweight design. The welding machine is operated according to the welding parameter table. A timer and stopwatch for time measurement are integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for continuous pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, thus greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will be gladly sent to you upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be done at any time on site. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a record\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 4 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e630 - 1200 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: 28900\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 4990 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 2200\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 70 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Price on request only","offer_id":53726867128588,"sku":"","price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/ZHCB-1200.png?v=1761208367"},{"product_id":"heizwendelschweissgerat-bluebox-1-0-d-20-160mm-vorfuhrgerat","title":"Electrofusion Welder \"Bluebox 1.0\" d 20 - 160mm - Demonstration Unit","description":"\u003cp\u003e\u003cstrong\u003eElectrofusion Welding Machine \"BLUEBOX 1.0\" as a demo unit \/ used\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eprofessional electrofusion welding machine (without documentation) incl. wireless scanner for only €999.99 - the units were used for demonstrations by qualified personnel - only a few welds were performed - the units are fully functional and in like-new condition\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe compact ''Bluebox 1.0'' is a reliable and, thanks to its automatic control, very easy-to-use \u003ca href=\"https:\/\/peschweisstechnik.de\/collections\/heizwendelschweissgeraete\"\u003eelectrofusion welding machine\u003c\/a\u003e for fittings up to d 160mm. \u003cspan data-mce-fragment=\"1\"\u003eThe latest generation welds electrofusion fittings from almost all manufacturers. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Bluebox 1.0 offers additional control, which allows for monitoring of the cooling time and real-time display of all welding process parameters on the screen.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003esimple and robust - suitable for tough construction site use\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003erange: electrofusion fittings with a diameter of up to 160 mm\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eis, of course, delivered calibrated\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003edevice firmly integrated into a transport case\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eLow weight: only 13 kg\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eExtremely simple, self-explanatory operation\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eOperating voltage: 10 V to 42 V\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eInput of welding data using the keypad\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eor automatic input of welding data via barcode scanner\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eAccessories: electrofusion adapter 4 mm and 4.7 mm\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003ewithout documentation of welding parameters\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003ecan be removed from the case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Cordless Scanner","offer_id":53735674151180,"sku":"","price":949.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizwendelschweissgeraet-Bluebox1.0-Heizwendelschweissen.png?v=1761208615"},{"product_id":"stumpfschweissmaschine-zhcn-1200-e","title":"Butt Welding Machine ZHCN 1200 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 1200 - E in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including aluminum clamping inserts or optionally without\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 630\u003c\/span\u003e–1200 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the activities carried out thanks to the messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed professionally and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows for partial automation of certain operations, such as the automatic retraction and approach of the carriage when removing the heating element or the pressure reduction during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The precise temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical consultation is possible via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: up to 4 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 630\u003cspan\u003e-1200\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e22000\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 3015 kilograms\u003c\/p\u003e\n\u003cp\u003eWeight of reduction clamping inserts: 1300 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 2200\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 70 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Price on application","offer_id":53747621429516,"sku":null,"price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-1200E.png?v=1761208759"},{"product_id":"stumpfschweissmaschine-zhcn-630-cnc","title":"Butt Welding Machine ZHCN 630 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 630 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or optionally steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 315 - 630 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN-CNC a bestseller among our butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert the facer and heating element when signaled by the machine, or remove them. The automation of the welding process reduces the susceptibility to errors to a minimum, and high-quality connections are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval to work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, thus enabling precise control of the welding process. The system reacts in real time to changes in the pipe's position and responds accordingly by adjusting the pressures and going through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eGeneral Technical Data:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 315\u003cspan\u003e-630 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e8650\u003c\/span\u003e\u003cspan\u003eW\u003c\/span\u003e\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 541 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e750 \u003c\/span\u003e\u003cspan\u003eWatts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 52 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Aluminium clamping inserts - 170kg","offer_id":53747710558476,"sku":"","price":20520.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/hydraulische_Stumpfschweissmaschine_ZHCN-630CNC.png?v=1761208222"},{"product_id":"stumpfschweissmaschine-zhcn-400-e","title":"Butt Welding Machine ZHCN 400 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 400 - E in a Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 110\u003c\/span\u003e–400 mm\u003cspan\u003e. All components of the device are controlled by the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the performed activities thanks to the messages displayed on the screen. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Semi-Automatic Welding Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain tasks, such as the automatic retraction and approach of the carriage when removing the heating element or lowering the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply, the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 110\u003cspan\u003e-400\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e4950\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 209\u003cspan\u003e \u003c\/span\u003eKilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel gripping inserts - 111KG","offer_id":53748448428300,"sku":"","price":11275.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminium clamping inserts - 55kg","offer_id":53748448461068,"sku":"","price":12285.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_ZHCN-400E.png?v=1761208046"},{"product_id":"innenwulstentferner-fur-pe-pp-hdpe-rohre-90-500-mm","title":"Internal Bead Remover for PE\/PP\/HDPE Pipes 90 - 500 mm","description":"\u003cp\u003e\u003cstrong\u003eInternal Bead Remover for Removing Welding Beads from PE \/ PP \/ HDPE Pipes in a Complete Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur internal bead remover was developed for use in civil engineering as an accessory for butt welding to professionally remove internal beads.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eeasy assembly\u003c\/li\u003e\n\n\u003cli\u003eavailable in various sets\u003c\/li\u003e\n\n\u003cli\u003erobust quality for daily use\u003c\/li\u003e\n\n\u003cli\u003estandard insertion depth 8 meters\u003c\/li\u003e\n\n\u003cli\u003ebase material is not damaged during operation\u003c\/li\u003e\n\n\u003cli\u003ethe rod can be extended as desired with our extension package\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe welding bead should be removed as much as possible during the cooling period. Upon request, we will gladly provide you with an offer for individual combinations of the device.\u003c\/p\u003e\n\u003cp\u003ed 90 mm = SDR 17 26, d 125 mm = SDR 11 26 inner diameter 79 - 116 mm\u003c\/p\u003e\n\u003cp\u003ed 140 mm = SDR 11 26, d 200 mm = SDR 11 13.6 inner diameter 114 - 170 mm\u003c\/p\u003e\n\u003cp\u003ed 200 mm = SDR 17 26, d 315 mm = SDR 9 33, d 355 mm = SDR 13.6 26 inner diameter 174 - 298 mm\u003c\/p\u003e\n\u003cp\u003ed 355 mm = SDR 13.6 26, d 500 mm = SDR 11 26 inner diameter 300 - 470 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is possible via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: depending on the variant - cutting head, rods with carrying bag\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 2 weeks from order confirmation\u003c\/p\u003e","brand":"Nowatech","offers":[{"title":"Set incl. frame 90 - 125 mm","offer_id":53843683246348,"sku":"","price":1260.0,"currency_code":"EUR","in_stock":true},{"title":"Set including pole 140 - 200 mm","offer_id":53843683279116,"sku":"","price":1368.0,"currency_code":"EUR","in_stock":true},{"title":"Set including pole 200 - 355 mm","offer_id":53843683311884,"sku":"","price":1464.0,"currency_code":"EUR","in_stock":true},{"title":"Set including linkage 355 - 500 mm","offer_id":53843683344652,"sku":"","price":1740.0,"currency_code":"EUR","in_stock":true},{"title":"Rod 8m - without cutting head","offer_id":53843811762444,"sku":"","price":599.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Innenwulstentferner-Schneidkopf-peschweisstechnik.jpg?v=1742075847"},{"product_id":"stromgenerator-230v-50hz-tiefbau-baustelle","title":"Power Generator 230V\/50Hz for the construction site","description":"\u003cp\u003e\u003cstrong\u003ePower Generator 230V\/50Hz for Construction Sites\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur power generator provides electricity for electrofusion welding machines or butt welding machines exactly where you need it!\u003c\/p\u003e\n\u003cp\u003eWorks for butt welding machines up to 500 mm and all electrofusion welding machines. We do not guarantee functionality with devices from other brands.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan\u003ereliable and robust - for tough construction site use\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eruns on unleaded petrol\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003elow consumption - only 2.5 liters per hour\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003eStandard equipment: 1x 230V\/32A socket, 1x 230V\/16A socket including thermal protection, oil level sensor, voltmeter, hour meter\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery: Power generator, manual\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 1 week from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Technical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGenerator type: \u003cspan\u003eAVR electronic regulation, synchronous, self-excited\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eVoltage\/Frequency: \u003cspan\u003e230V – 50Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003emax. power: 7 kW – 230 V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003emax. current: 30.4A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProtection class: IP21\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions: \u003cspan\u003e800x570x540 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWeight: 88 KG\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSound pressure: 72 dBA at 7 m distance\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumption: 2.5 l\/h\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEngine type: 4-stroke, petrol, single-cylinder, air-cooled\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDisplacement \/ Power: 429 cm3 \/ 14 PS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFuel: unleaded petrol\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":53844087275788,"sku":null,"price":1749.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Generatoreinphasigstumpfschweissen.jpg?v=1732836366"}],"url":"https:\/\/peschweisstechnik.de\/en\/collections\/tiefbau-alle-produkte.oembed?page=2","provider":"PE Schweisstechnik","version":"1.0","type":"link"}