{"title":"Butt welding machines","description":"\u003cp\u003eIn hot plate butt welding, the joining surfaces of the parts to be welded are aligned under pressure at the hot plate, then heated to welding temperature with reduced pressure, and after removal of the hot plate, joined under pressure (alignment, heating, changeover, joining). Before starting the welding work, the temperature of the hot plate necessary for welding must be checked. For thermal equilibrium to be established, the hot plate may not be used earlier than 10 minutes after reaching the target temperature. The nominal wall thicknesses of the parts to be welded must match in the joining area, and pipes and fittings must be axially aligned before clamping. Shortly before welding, the surfaces to be welded must be machined so that they are flat and parallel to each other when clamped. Tools and surfaces must be kept clean and grease-free. Gap width between the machined welding surfaces and offset must be checked, and chips that have fallen into the pipe must be removed. Hot plate at 200 - 220 °C? Now the hot plate butt welding can begin. And because our butt welding machines are so convincing, now with a 30-day money-back guarantee!\u003c\/p\u003e","products":[{"product_id":"roweld-p110-komplett-40-110mm","title":"ROWELD P110 complete d 40 - 110mm","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan data-ui-id=\"page-title-wrapper\" data-mce-fragment=\"1\" itemprop=\"name\"\u003eROWELD P110 in a set - 40-110mm - 230V\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv data-mce-fragment=\"1\" itemprop=\"mp_marketingtext\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe ROWELD P110 combines a compact design with maximum stability for use on construction sites or in the workshop. For welding pipes and fittings made of PE, PP and PVDF for pipe diameters from 40 to 110 mm. The high quality and excellent workmanship are evident in every detail. Hardened and hard chrome-plated guide shafts guarantee absolutely torsion-resistant use of the machine. Thanks to the angle-adjustable basic clamping elements, segment bend welding is also possible. Particularly suitable for use in installation work and in confined spaces, but also in pipe networks.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003ePE, PP and PVDF for pipe diameters from 40 to 110 mm\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eSegment bends can be manufactured\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003ePrecise force adjustment\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eSingle and double-sided milling possible\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eProduction of pipe\/fitting connections\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eSecure hold and easy axial alignment of pipes\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eWide and narrow reduction clamping inserts included in delivery\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery: P110 basic machine with table holder, heating element, 2 x basic clamping jaws, reduction inserts, hand planer, table clamp, 2x hexagon socket wrenches, operating instructions\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 2 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eMains voltage: 230 V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eNet weight: 38 KG\u003c\/p\u003e","brand":"Rothenberger GmbH","offers":[{"title":"Default Title","offer_id":41962782163104,"sku":"","price":3995.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/2803_roweld_p_110_complete_230_v_50_60_hz-main_image-5748.jpg?v=1649717008"},{"product_id":"saniline-p160-rocase-40-160mm","title":"SANILINE P160 ROCASE 40-160mm","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan data-ui-id=\"page-title-wrapper\" data-mce-fragment=\"1\" itemprop=\"name\"\u003eSANILINE P160 ROCASE 40-160mm, 23\u003c\/span\u003e\u003cspan data-ui-id=\"page-title-wrapper\" data-mce-fragment=\"1\" itemprop=\"name\"\u003e0V\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cspan data-ui-id=\"page-title-wrapper\" data-mce-fragment=\"1\" itemprop=\"name\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv data-mce-fragment=\"1\" itemprop=\"mp_marketingtext\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe P160 Saniline is ideal for installers. Its compact design allows it to be stored in any vehicle. The heating element features electronically controlled temperature regulation (DVS compliant) and can also be used separately if required.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePRODUCT PROFILE\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv data-mce-fragment=\"1\" itemprop=\"short_description\"\u003e\n\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eHigh stability due to optimized force distribution\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eAll common fittings in sanitary installation can be clamped.\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eFlexible for difficult positions due to removable heating element.\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eMinimized drag forces.\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003ePrecise force adjustment.\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eSafety device against unintentional starting and dislodging of the milling unit.\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eSecure holding of pipes, fittings, tight 45° branches and 90° bends.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"product-view-actions\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-view-actions\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical data:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-view-actions\" data-mce-fragment=\"1\"\u003e\n\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr class=\"ursprungsland\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eCountry of Origin\u003c\/th\u003e\n\n\u003ctd data-th=\"Ursprungsland\" class=\"col data\"\u003eGermany\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"ursprungsregion\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eRegion of Origin\u003c\/th\u003e\n\n\u003ctd data-th=\"Ursprungsregion\" class=\"col data\"\u003eHesse\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"verpackung breite zw\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003ePackaging Width ZW\u003c\/th\u003e\n\n\u003ctd data-th=\"Verpackung Breite ZW\" class=\"col data\"\u003e45\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"produkthierarchie nr.\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eProduct Hierarchy No.\u003c\/th\u003e\n\n\u003ctd data-th=\"Produkthierarchie Nr.\" class=\"col data\"\u003e140300020001000100\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"bruttogewicht zw\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eGross Weight ZW\u003c\/th\u003e\n\n\u003ctd data-th=\"Bruttogewicht ZW\" class=\"col data\"\u003e60,000\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"nettogewicht\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eNet Weight\u003c\/th\u003e\n\n\u003ctd data-th=\"Nettogewicht\" class=\"col data\"\u003e52.500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"bruttogewicht\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eGross Weight\u003c\/th\u003e\n\n\u003ctd data-th=\"Bruttogewicht\" class=\"col data\"\u003e60.000 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"länge x breite x höhe\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eLength x Width x Height\u003c\/th\u003e\n\n\u003ctd data-th=\"Länge x Breite x Höhe\" class=\"col data\"\u003e75.000 X 45.000 X 90.000 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"verpackung länge\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003ePackaging Length\u003c\/th\u003e\n\n\u003ctd data-th=\"Verpackung Länge\" class=\"col data\"\u003e75 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"verpackung breite\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003ePackaging Width\u003c\/th\u003e\n\n\u003ctd data-th=\"Verpackung Breite\" class=\"col data\"\u003e45 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"verpackung höhe\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003ePackaging Height\u003c\/th\u003e\n\n\u003ctd data-th=\"Verpackung Höhe\" class=\"col data\"\u003e90 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"dvgw-konform\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eDVGW-compliant\u003c\/th\u003e\n\n\u003ctd data-th=\"DVGW-konform\" class=\"col data\"\u003eYes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"text gefahrgut-kennzeichen\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eText Hazardous Goods Marking\u003c\/th\u003e\n\n\u003ctd data-th=\"Text Gefahrgut-Kennzeichen\" class=\"col data\"\u003eMaterial is not hazardous goods\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"kennzeichnung verkaufsfähiger artikel\/ersatzteil\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eMarking saleable item\/spare part\u003c\/th\u003e\n\n\u003ctd data-th=\"Kennzeichnung verkaufsfähiger Artikel\/Ersatzteil\" class=\"col data\"\u003ePrice list\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"warengruppe\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eProduct Group\u003c\/th\u003e\n\n\u003ctd data-th=\"Warengruppe\" class=\"col data\"\u003ePPW\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"produktgruppe\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eProduct Group\u003c\/th\u003e\n\n\u003ctd data-th=\"Produktgruppe\" class=\"col data\"\u003ePlastics Technology\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"materialgruppe\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eMaterial Group\u003c\/th\u003e\n\n\u003ctd data-th=\"Materialgruppe\" class=\"col data\"\u003eDiscount Group 1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"netzstecker typ\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eMains Plug Type\u003c\/th\u003e\n\n\u003ctd data-th=\"Netzstecker Typ\" class=\"col data\"\u003ePlug Type F (CEE 7\/4)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"spannung\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eVoltage\u003c\/th\u003e\n\n\u003ctd data-th=\"Spannung\" class=\"col data\"\u003e220 - 240 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"arbeitsbereich durchmesser mm\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eWorking Range Diameter mm\u003c\/th\u003e\n\n\u003ctd data-th=\"Arbeitsbereich Durchmesser mm\" class=\"col data\"\u003e40 - 160 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"eingangsleistung\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eInput Power\u003c\/th\u003e\n\n\u003ctd data-th=\"Eingangsleistung\" class=\"col data\"\u003e1,850 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"arbeitsbereich temperatur\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eWorking Temperature Range\u003c\/th\u003e\n\n\u003ctd data-th=\"Arbeitsbereich Temperatur\" class=\"col data\"\u003e5 - 60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"netzfrequenz\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eMains Frequency\u003c\/th\u003e\n\n\u003ctd data-th=\"Netzfrequenz\" class=\"col data\"\u003e50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr class=\"bezeichnung variante\"\u003e\n\n\u003cth scope=\"row\" class=\"col label\"\u003eVariant Designation\u003c\/th\u003e\n\n\u003ctd data-th=\"Bezeichnung Variante\" class=\"col data\"\u003eSANILINE P160 ROCASE 40-160mm, 230V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e","brand":"Rothenberger GmbH","offers":[{"title":"Default Title","offer_id":41962784424096,"sku":"","price":3445.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/roweld-p160-saniline_1000002964_p01.jpg?v=1649717259"},{"product_id":"heizelementstumpfschweissmaschine-miniplast-2","title":"Miniplast 2 in a Set","description":"\u003cp\u003eThe Miniplast\/2 for butt welding PE, PP, and PVDF pipes and fittings from DA 20 to DA 110 with heating elements. Due to its lightweight and compact design, the Miniplast\/2 is ideally suited for use in pipe networks and for assembly work. For stationary use, the machine can be fixed in a vice or with a table clamp. The basic machine has two wide aluminum basic clamping tools for segment bend production, which can be swiveled by 15° on each side. By screwing in 8 narrow reduction clamping inserts, double clamping is achieved for smaller diameters. For fittings with short legs, a narrow fitting clamping tool is optionally available. Due to the special design of the pressure application, the machine can be clamped directly to the shortest pipe stubs on walls and plates.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\n\u003cp\u003eThe Miniplast\/2 can be used in the workshop, on construction sites, and for assembly. At 6.3 kg, handling the Miniplast\/2 is very easy, and the machine can be used in a variety of ways. Pipes and fittings from DA 20 to DA 110 can be welded. The basic machine with optional narrow fitting tools is suitable for holding injection-molded fittings with short clamping ends. Extremely short protruding pipe ends can also be clamped and welded. For the production of T-pieces and 90° pipe bends (up to DA 90 mm), an extended version of the basic machine is available. Both basic clamping tools can be swiveled by up to 15° on each side. This basic machine is equipped with height and side adjustment. The lightweight, compact manual planer is operated via a ratchet. An electric planer is optionally available. The electronically controlled heating element with a non-stick coating has an indicator light for mains and interval control. An adjustment box is available for protected storage of the planer and heating element. The steel sheet carrying case is used for transporting and protected storage of the complete Miniplast\/2.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cul\u003e\n\n\u003cli\u003emanual welding machine from d 20 - 110\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003emaximum welding force 60kp\u003c\/li\u003e\n\n\u003cli\u003eincl. table mounting\u003c\/li\u003e\n\n\u003cli\u003eincl. fitting - basic clamping element right and left (individually available upon request)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSet consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ebasic machine with basic clamping tool da 110\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003etable mounting\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003emechanical or electrical planer\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eheating element 230Volt\/500Watt\u003c\/li\u003e\n\n\u003cli\u003eadjustment box for planer and heating element\u003c\/li\u003e\n\n\u003cli\u003esteel sheet carrying case (400 x 330 x 360mm)\u003c\/li\u003e\n\n\u003cli\u003e1 set of reduction clamping inserts (8 pieces of half shells) d 20, 25, 32, 40, 50, 63, 75, 90mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"WDS-Welding GmbH","offers":[{"title":"with mechanical thickness planer","offer_id":45199426486540,"sku":"","price":4195.99,"currency_code":"EUR","in_stock":true},{"title":"with electric planer","offer_id":45199441002764,"sku":"","price":4895.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/heizelement-stumpfschweissmaschine-miniplast2.png?v=1728833079"},{"product_id":"maxiplast-im-set","title":"Maxiplast Set","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS Maxiplast for butt welding PE, PP, and PVDF pipes and fittings from DA 50 to DA 160 with heating elements. Thanks to its compact and robust design, the machine is ideal for use in hard-to-reach places under construction site conditions. For stationary use, an additional base frame is available, allowing it to be used as a benchtop device. The stable basic machine is equipped with two aluminum clamping tools, each pivotable by 15°, for producing segmented bends. By using various reducing inserts in narrow, wide, or super-wide versions, all clamping options can be realized. For fittings with extremely short legs, solid steel clamping tools in a narrow version are available. The stable substructure with ball-bearing guides, trapezoidal spindle, and spring-damped force application enables fast movement for short changeover times and gentle pressure build-up.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS Maxiplast can be used in the workshop, on the construction site, and for assembly. At 13.3 kg, the WIDOS Maxiplast is very easy to handle and the machine can be used in many ways. Pipes and fittings from DA 50 to DA 160 can be welded. The stable basic machine is equipped with two aluminum clamping tools, each pivotable by 15°, for producing segmented bends. By using various reducing inserts in narrow, wide, or super-wide versions, all clamping options can be realized. For fittings with extremely short legs, solid steel clamping tools in a narrow version are available. The stable substructure with ball-bearing guides, trapezoidal spindle, and spring-damped force application enables fast movement for short changeover times and gentle pressure build-up. The robust planer is electrically driven and easy to operate. The electronically controlled heating element with a high-quality non-stick coating has an external power switch and indicator lights with interval display. The precise temperature monitoring meets all requirements according to DVS 2208. A stable and easy-to-transport setting box is available for safely placing the heating element and planer. The complete machine is transported and stored in a transport box with additional storage compartments for all reducing inserts.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003emanual welding machine for d 50 - 160mm\u003c\/li\u003e\n\n\u003cli\u003emaximum welding force 100kp\u003c\/li\u003e\n\n\u003cli\u003eincl. table mount\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003efitting - clamping element available on request\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSet consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBasic machine with basic clamping tool da 160\u003c\/li\u003e\n\n\u003cli\u003eplaner\u003c\/li\u003e\n\n\u003cli\u003eHeating element 230Volt\/500Watt\u003c\/li\u003e\n\n\u003cli\u003eSetting box for planer and heating element\u003c\/li\u003e\n\n\u003cli\u003eSteel sheet carrying case (400 x 330 x 360mm)\u003c\/li\u003e\n\n\u003cli\u003eincl. table mount\u003c\/li\u003e\n\n\u003cli\u003e1 set each of reduction clamping inserts (8 half shells) d 50, 63, 75, 90, 110, 125, 140mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e","brand":"WDS-Welding GmbH","offers":[{"title":"Default Title","offer_id":42021501337760,"sku":"","price":5890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/maxiplast-heizelement-stumpfschweissmaschine.jpg?v=1728833381"},{"product_id":"widos-2500-heizelement-stumpfschweissen","title":"Widos 2500 Heating Element Butt Welding Machine d 160 - 315mm","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eDo you need a heating element butt welding machine for workshop use for pipes and fittings from DA 50 to DA 160, DA 250 or DA 315? Then the WIDOS 2500 is the right machine for you.\u003cbr\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 2500 is a handy, mobile plastic welding machine, which is preferably used in the workshop. The WIDOS 2500 is particularly suitable for heating element butt welding in sanitary installations and drainage pipes, but also as a basic machine for special constructions.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 2500 has an electrically operated planer, an electronic heating element and a transport and assembly box for safe and protected storage. The WIDOS 2500 is available in 3 versions: \u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e- WIDOS 2500\/160 from DA 50 to DA 160\u003cbr\u003e- WIDOS 2500\/250 from DA 50 to DA 250 \u003cbr\u003e- WIDOS 2500\/315 from DA 50 to DA 315\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003ewith two-part basic clamping tools, each side pivotable by 15°, clamping inserts and pipe supports in prism design.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe planer has a chain drive in a closed aluminum housing and automatic chip removal to the outside. The heating element is non-stick coated, has electronic temperature control, indicator lights, an on-off switch and a connection cable with a Schuko plug.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003emanual welding machine from d 50 - 315mm\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003emaximum welding force 160kp\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe machine is currently only available in the simple version without socket welding!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eDelivery time: currently 6 - 8 weeks from order confirmation\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eScope of delivery: Basic machine, planer 230 Volt \/ 950 Watt, heating element 230 Volt \/ 800 Watt, basic clamping tool set, prism pipe support (2 pieces), transport box (960 x 690 x 710 mm), reduction clamping inserts (1 set = 4 half shells)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\u003c\/ul\u003e\n\n\n\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Widos 2500 d 160mm in a set","offer_id":42021586108576,"sku":"","price":5995.99,"currency_code":"EUR","in_stock":true},{"title":"Widos 2500 d 250mm in a set","offer_id":42021588041888,"sku":"","price":6995.99,"currency_code":"EUR","in_stock":true},{"title":"Widos 2500 d 315mm in a set","offer_id":42021588861088,"sku":"","price":8695.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/heizelement-stumpfschweissmaschine-widos2500.jpg?v=1683831987"},{"product_id":"widos-4400-stumpfschweissmaschine","title":"WIDOS 4400 Heating Element Butt Welding Machine incl. Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4400 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS 4400 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 50 to DA 160. The WIDOS 4400 has a double clamping device with quick clamping on both the fixed and movable sides. This is guided on 2 shafts. The machine has 2 flexible hoses with quick couplings for connection to the hydraulic control unit. The double clamping device is bolted to the steel tube underframe. The outer fixed clamping element can be easily removed by loosening 3 screws to allow welding in hard-to-reach places, e.g. in manholes or on the branch side of T-pieces. By removing it from the underframe, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4400 is therefore a 4-ring and a 3-ring machine in one.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eThe WIDOS 4400 can be used on construction sites and in trenches. Pipes and fittings from DA 50 to DA 160 can be processed. The outer fixed clamping element of the WIDOS 4400 can be easily removed by loosening 3 screws to allow welding in hard-to-reach places. By removing it from the underframe, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends, thus allowing for easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a post-pressure device to support the joining force during the cooling time and 2 quick couplings as well as a digital manometer for exact pressure display. The planer has a chain drive in a closed aluminum housing. The planer blades used are ground on both sides and can therefore be used multiple times. The heating element is non-stick coated and has electronic temperature control with digital display. A storage box is available for heat-protected storage of the heating element and for hanging the planer. The WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021725896864,"sku":"","price":8595.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/WIDOS4400STUMPFSCHWEISSEN_4.png?v=1761208455"},{"product_id":"widos-4600-stumpfschweissmaschine","title":"WIDOS 4600 Heating Element Butt Welding Machine with Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4600 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cbr\u003e\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4600 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 75 to DA 250. The WIDOS 4600 has a double clamping device with quick clamping on both the fixed and movable sides. This is guided on 2 shafts. For connection to the hydraulic control unit, there are 2 flexible hoses with quick couplings on the machine. The double clamping device is bolted to the steel tube undercarriage. The outer fixed clamping element can be easily removed by loosening 3 screws in order to weld in hard-to-reach places, e.g. in manholes or on the branch side of T-pieces. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4600 is thus a 4-ring and a 3-ring machine in one.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4600 can be used on construction sites and in trenches. Pipes and fittings from DA 75 to DA 250 can be processed. The outer fixed clamping element of the WIDOS 4600 can be easily removed by loosening 3 screws in order to weld in hard-to-reach places. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends and thus enables easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a push-back device to support the joining force during the cooling time, 2 quick couplings and a digital manometer for precise pressure display. The facing tool has a chain drive in a closed aluminum housing. The facing tool blades used are ground on both sides and can therefore be used multiple times.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe heating element is non-stick coated and has electronic temperature control with digital display. A setting box is available for heat-protected storage of the heating element and for hanging the facing tool. WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021728944288,"sku":"","price":9895.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/heizelement.stumpfschweissmaschine-widos4600.png?v=1761208679"},{"product_id":"widos-4900-stumpfschweissmaschine","title":"WIDOS 4900 Heating Element Butt Welding Machine incl. Clamping Inserts","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHEATING ELEMENT BUTT WELDING MACHINE WIDOS 4900 IN A SET\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice includes clamping inserts! For the price without clamping inserts, please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4900 can be used to process PE, PP, PA and PVDF pipes and fittings from DA 90 to DA 315. The WIDOS 4900 has a double clamping device with quick clamping on the fixed and movable sides. This is guided on 2 shafts. For connection to the hydraulic control unit, there are 2 flexible hoses with quick couplings on the machine. The double clamping device is bolted to the steel pipe frame. The outer fixed clamping element can be easily removed by loosening 3 screws to allow welding in hard-to-reach places, e.g. in a shaft or on the branch side of a T-piece. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. The WIDOS 4900 is thus a 4-ring and a 3-ring machine in one.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe WIDOS 4900 can be used on construction sites and in trenches. Pipes and fittings from DA 90 to DA 315 can be processed. The outer fixed clamping element of the WIDOS 4900 can be easily removed by loosening 3 screws to allow welding in hard-to-reach places. By removing it from the undercarriage, the remaining unit can be used as a 3-ring repair machine. A tear-off device on the base frame prevents the heating element from sticking to the heated pipe ends, thus enabling easy handling. The hydraulic unit moves the right double clamping device and precisely controls the joining force. It has a post-pressure device to support the joining force during the cooling time and 2 quick couplings as well as a digital manometer for precise pressure display. The planer has a chain drive in a closed aluminum housing. The planer blades used are ground on both sides and can therefore be used multiple times.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003eThe heating element is non-stick coated and has electronic temperature control with digital display. An adjustment box is available for heat-protected storage of the heating element and for hanging the planer. WIDOS welding machines can be easily retrofitted with WIDOS SPA welding protocol recording devices and are also available in CNC-controlled versions.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":42021756993696,"sku":"","price":11195.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/WIDOS-4911-blau_506aed28-27b1-4062-bf6c-d3b19b0a293c.png?v=1761208389"},{"product_id":"roweld-p200-b","title":"ROWELD P200 B","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrice on request! Please contact us by email or via our contact form.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHydraulic butt welding machine Ø 63 - 200mm. The selection of durable components ensures a low-maintenance, robust and reliable operation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe ROWELD Hydraulics Type Professional with stepless pressure adjustment, easy-to-read manometer, and pressure accumulator is suitable for welding according to DVS and other internationally valid directives and standards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"px-4\"\u003e\n\n\u003cli class=\"py-2\"\u003eEasy to use\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eRobust\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eFlexible application\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eParticularly torsion-resistant, weight-optimized frame\u003c\/li\u003e\n\n\u003cli class=\"py-2 border-t border-gray-100\"\u003eSafe\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"flex flex-row flex-wrap -mx-grid mb-8\"\u003e\n\n\u003cdiv class=\"w-full lg:w-3\/4\"\u003e\n\n\u003ctable class=\"w-full table-auto\"\u003e\n\n\u003ctbody class=\"text-sm leading-6 align-baseline\"\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eInput power\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e2 kW\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eVoltage\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e220 - 240 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eWorking range diameter in mm\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e63 - 200 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eMains plug type\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003ePlug Type F (CEE 7\/4)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eMains frequency\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"flex flex-row flex-wrap -mx-grid\"\u003e\n\n\u003cdiv class=\"w-full lg:w-1\/4 px-grid\"\u003e\n\n\u003ctable class=\"w-full table-auto\"\u003e\n\n\u003ctbody class=\"text-sm leading-6 align-baseline\"\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eLength x Width x Height\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e120,000 X 80,000 X 75,000 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eNet weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eGross weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Length\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e120 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Width\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e80 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003eShipping weight\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e94,500 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-1\/3 px-grid\"\u003ePacking Height\u003c\/td\u003e\n\n\u003ctd class=\"w-1\/2 py-2 lg:w-2\/3 px-grid\"\u003e75 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Rothenberger GmbH","offers":[{"title":"Default Title","offer_id":42021870993568,"sku":"","price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/products\/2707_ROWELDP630BProfessionalBasicSet400V50Hz-Mainimage-3832.jpg?v=1761207989"},{"product_id":"miniplast-2-ir","title":"Miniplast 2 \/ Infrared (IR) Welding Machine","description":"\u003cp\u003e\u003cstrong\u003eINFRARED (IR) WELDING MACHINE D20 - 110\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Miniplast\/2 IR is an infrared welding machine specially developed for manual welding of pipes and fittings DA 20 - 110 using non-contact infrared technology, max. force 600 daN. With the Miniplast 2 IR, all IR-suitable materials such as PP, as well as practically all fluoropolymers such as PVDF, PCTFE, PFA, etc., can be processed easily and safely without system dependency. The workpieces can be held and securely fixed in wide aluminum tools or, alternatively, in narrow fitting clamps.\u003cbr\u003e\u003cbr\u003eThe heating element for IR welding 230 V \/ 2400 W is built into a frame with linear guides, which is simultaneously used as a table mounting for the basic machine. The heating element, up to max. 550°C in high-temperature design with a special ceramic coating and stops for precise irradiation distance, is mounted on a sturdy base frame with precise 2-axis guidance. Includes a facing tool and external electronic control with LED display, power cable, and power plug 230 Volt \/ 550 Watt.\u003cbr\u003eTransport box for basic machine, facing tool, IR heating element, control unit, adjustment box, and clamping inserts\u003cbr\u003e69x98.5x69.4 cm.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003emanual welding machine from d 20 - 110 IR\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003emaximum welding force 600daN\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eincluding facing tool and control\u003c\/li\u003e\n\n\u003cli\u003esturdy transport box\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSet consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ebasic machine including power cable and power plug\u003c\/li\u003e\n\n\u003cli\u003efacing tool and external control with LED display\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eIR heating element 230Volt \/ 2400 Watt with control unit\u003c\/li\u003e\n\n\u003cli\u003etransport box for basic machine\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eadjustment box\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eclamping inserts \u003cspan data-mce-fragment=\"1\"\u003e69x98.5x69.4 cm\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"WDS-Welding GmbH","offers":[{"title":"Miniplast 2 \/ IR","offer_id":44370847498508,"sku":"","price":9895.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Miniplast2-IR-Infrarot-Schweissmaschine-Widos.png?v=1683834010"},{"product_id":"heizelement-160-mm-fur-pe-pp-hdpe-kunststoffrohre","title":"Heating element 160 mm for PE, PP, HDPE plastic pipes","description":"\u003cp\u003e\u003cspan\u003eOur heating element is used for butt welding as well as for heating element socket welding of plastic pipes and fittings made of PE, PP, PPR, PB and HDPE. Due to the Teflon coating of the heating surface, it can be used for classic butt welding up to d 160 mm, as well as for socket-spigot welding.\u003c\/span\u003e\u003cspan\u003e It is easy to transport and very flexible to use at all locations. With an ergonomic handle, electronic and thermostatic digital control with temperature display, it ensures maximum ease of use. The heating elements are suitable for complicated and hard-to-reach system parts on the construction site and in the workshop.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ecoated heating element with two receptacles for heating socket and heating spigot\u003c\/li\u003e\n\n\u003cli\u003etemperature control of the heating element according to DVS guidelines\u003c\/li\u003e\n\n\u003cli\u003erobust and durable, easy to use\u003c\/li\u003e\n\n\u003cli\u003eincl. heating socket and heating spigot - d 20 - d 90 mm (up to 160mm on request)\u003c\/li\u003e\n\n\u003cli\u003eworking temperature: 220 - 290 C°\u003c\/li\u003e\n\n\u003cli\u003edelivery incl. robust sheet metal carrying case\u003c\/li\u003e\n\n\u003cli\u003eincl. table stand\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery: Heating element, transport box, heating socket\/heating spigot (20 - 90mm), table stand, operating instructions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":45167642575116,"sku":"","price":295.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Muffenschwei_ger_t-Schwei_spiegel.png?v=1763932017"},{"product_id":"hydraulische-stumpfschweissmaschine-zhcn-160-cnc-im-set","title":"Butt welding machine ZHCN 160 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 160 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC-controlled welding machine (DVS 2207 compliant) including clamping inserts (either steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for recording \/ documenting welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in a diameter range of 50 - 160 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC our bestseller among butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert or remove the facer and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality joints are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. The machine can be operated in German, English, Russian, and Polish. It is possible to connect an external GPS antenna. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, enabling precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by adapting the pressures and progressing through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick, automatic removal of the heating element between the pipes, thereby reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Parameter Registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 104 Kilograms\u003c\/p\u003e\u003c!--nl--\"\u003e\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 50 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 22kg","offer_id":53626405323020,"sku":"","price":7085.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 14KG","offer_id":53626405355788,"sku":"","price":7455.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschine_ZHCN-160CNC.png?v=1761207840"},{"product_id":"stumpfschweissmaschine-zhcn-250-cnc-im-set","title":"Butt Welding Machine ZHCN 250 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 250 - CNC in Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 63 - 250 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC a bestseller among our butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert and remove the facer and heating element upon the machine's signal. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections can be achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's certification for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, enabling precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by modifying pressures and progressing through subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick automatic removal of the heating element between the pipes, thus reducing the changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Parameter Registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine, as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e63-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3650 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 121 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 5\u003cspan\u003e50 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 52 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 68KG","offer_id":53626560053516,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53626560086284,"sku":"","price":8715.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschineZHCN-250CNC.png?v=1761208295"},{"product_id":"stumpfschweissmaschine-zhcn-315-cnc-im-set","title":"Butt Welding Machine ZHCN 315 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 315 - CNC in Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC-controlled welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 90 - 315 mm. Its unbeatable price-performance ratio, robust design, and ease of use make the ZHCN - CNC a bestseller among our butt welding machines. With CNC-controlled machines, the operator is not required to set the necessary pressure or control the movement of the pipes. The operator's only task is to mount the pipes, insert and remove the facing tool and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information is available upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME position sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that monitors the pipe's position, allowing for precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts accordingly by regulating pressures and moving through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoval of the heating element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with an automatic heating element removal system, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, facing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e90-315 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3850 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 134 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 5\u003cspan\u003e50 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 52 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53626571653388,"sku":"","price":8815.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping inserts made of aluminum - 38KG","offer_id":53626571686156,"sku":"","price":9445.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/HydraulischeStumpfschweissmaschine_ZHCN-315CNC.png?v=1761208236"},{"product_id":"stumpfschweissmaschine-zhcn-500-rcnc-im-set","title":"Butt Welding Machine ZHCN 400 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 400 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or steel (optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for recording\/documenting welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 110 - 400 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC our bestseller among butt welding machines. With CNC controlled machines, the operator is not required to set the necessary pressure or control the movement of the pipes. The operator's only task is to mount the pipes, and insert or remove the facing tool and heating element when signaled by the machine. By automating the welding process, the susceptibility to errors is reduced to a minimum, and high-quality connections can be achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information is available upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME position sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that monitors the pipe's position, allowing for precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts pressures accordingly, progressing through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating element removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with an automatic heating element removal system, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding parameter registration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, facing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eGeneral Technical Data:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 110\u003cspan\u003e-400 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e4950W\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 214 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 550\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 52 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 111KG","offer_id":53747709214988,"sku":"","price":12035.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 55KG","offer_id":53747709247756,"sku":"","price":13045.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet-heizelement_Stumpfschweissen_ZHCN-400CNC.png?v=1761208138"},{"product_id":"stumpfschweissmaschine-zrcn-160-im-set","title":"Butt Welding Machine ZRCN 160","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZRCN 160 for the small budget\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003emanual butt welding machine ZRCN 160 without hydraulic unit - including clamping inserts (steel or aluminium optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZRCN type welding machine is a powerful yet handy, reliable and easy to transport butt welding machine for welding plastic pipes (PE, PP, PVDF) with diameters from 50 mm to 160 mm. The ZRCN type welding machine is most commonly used for connecting protective pipes for the energy and telecommunications industries, as well as for welding downpipes and air conditioning ducts. The machine is equipped with a manual gearbox that allows you to achieve the desired pressing force. The force is measured with a spring force gauge. The welding machine is operated according to the welding parameter table. The timer is integrated into the handle of the heating element.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating element with controller in the handle:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heating element is controlled by a controller integrated in the handle, and the temperature is set using function keys on the control panel. The controller has an additional timer function to ensure an overview of individual welding processes.\u003c\/p\u003e\n\u003cp\u003eThe machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral technical data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e2200 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 48 Kilograms\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts","offer_id":53628533047564,"sku":null,"price":3250.0,"currency_code":"EUR","in_stock":true},{"title":"Aluminium clamping inserts","offer_id":53628533080332,"sku":"","price":3450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizelement_Stumpfschweissmaschine_zrcn_160.png?v=1761208724"},{"product_id":"stumpfschweissmaschine-zhcn-160-e","title":"Butt Welding Machine ZHCN 160 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 160 - E in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (optionally steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from \u003c\/span\u003e50–160 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, which has a permanently installed recording device that allows control of the welding machine as well as monitoring and display of the performed activities thanks to the messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Semi-Automatic Welding Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows partial automation of certain activities, such as the automatic movement of the carriage when removing the heating element or lowering the pressure during the welding phase. Here, valuable time is saved on the construction site and operator errors are minimized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled via the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support bracket, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 99 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 Welding Protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 22kg","offer_id":53628659073292,"sku":"","price":6295.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum Clamping Inserts - 14KG","offer_id":53628659106060,"sku":null,"price":6665.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-160E.png?v=1761208074"},{"product_id":"stumpfschweissmaschine-zhcn-250-e","title":"Butt Welding Machine ZHCN 250 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 250 - E in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (either steel or aluminum)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters of 63\u003c\/span\u003e–250 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, enabling control of the welding machine as well as monitoring and display of the performed activities thanks to messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the welding is performed professionally and cleanly. This prevents the welder, for example, from not adhering to the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows for partial automation of certain tasks, such as automatic movement of the carriage when removing the heating element or lowering the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical consultation is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 63\u003cspan\u003e-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3650 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 116 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel Clamping Inserts - 68 KG","offer_id":53628724642060,"sku":"","price":7345.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53628724674828,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-250E.png?v=1761208628"},{"product_id":"stumpfschweissmaschine-zhcn-315-e","title":"Butt Welding Machine ZHCN 315 - E","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine ZHCN 315 - E in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum, optionally)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 90\u003c\/span\u003e–315 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, which has a permanently installed recording device that allows control of the welding machine as well as monitoring and display of the performed activities thanks to messages shown on the display. The control program monitors the operator and prevents them from making errors (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. Further information will be gladly sent to you upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStandardly, ZHCN-E welding machines operate in semi-automatic mode and guide the operator step by step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not adhering to the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain activities, such as automatic retraction and advance of the carriage when removing the heating element or pressure reduction during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN heating element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 90\u003cspan\u003e-315\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3850 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 129 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53628731949324,"sku":"","price":8085.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping Inserts Made of Aluminum - 38KG","offer_id":53628731982092,"sku":"","price":8715.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-315E.png?v=1761208545"},{"product_id":"stumpfschweissmaschine-zhcn-630-e","title":"Butt Welding Machine ZHCN 630 - E","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine ZHCN 630 - E in set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or optionally without\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of the type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters of 355\u003c\/span\u003e–630 mm\u003cspan\u003e . All components of the device are controlled by the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e , in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the performed activities thanks to the messages displayed on the screen. The control program monitors the operator and prevents them from making mistakes (e.g. incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e The machine can be operated in German, English, Russian and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode and guide the operator step by step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain activities, such as the automatic retraction and advance of the carriage when removing the heating element or the lowering of the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 355\u003cspan\u003e-630\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: 8650\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 720 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 750\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 Welding Protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 50 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"incl. aluminum clamping inserts - 180KG","offer_id":53747616743692,"sku":"","price":19400.0,"currency_code":"EUR","in_stock":true},{"title":"without chip inserts","offer_id":53747616776460,"sku":"","price":13400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_ZHCN-630E.png?v=1761208742"},{"product_id":"stumpfschweissgerat-zhcb-160","title":"Butt Welding Machine ZHCB 160","description":"\u003cp\u003e\u003cstrong\u003eZHCB 160 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum, optional) with the possibility of logging and operating assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 50 - 160 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timers and stopwatches for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. This new solution has reduced the machine's weight and dimensions by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine greatly simplifies the operation of the welder and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to activate the pump motor. This solution allows you to reduce the operating time of the generator and minimize possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down the times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The installation itself does not require additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a record\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be stored on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. You can find the device in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support brackets, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e50-160 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e2750 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 98 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel Clamping Inserts - 22 KG","offer_id":53725786997004,"sku":"","price":5249.99,"currency_code":"EUR","in_stock":true},{"title":"Clamping inserts made of aluminum - 14KG","offer_id":53725787029772,"sku":null,"price":5569.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_hydraulisch_ZHCB-160.png?v=1761208311"},{"product_id":"stumpfschweissgerat-zhcb-160-kopie","title":"Data Logger for Logging - RZEN 2000","description":"\u003cp\u003e\u003cstrong\u003eData logger for our butt welding machines ZHCB 160 - 1200\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur data logger guides the operator through the entire welding process, thereby reducing sources of error during welding and logging - DVS 2207 compliant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on-site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the machine from which a recording\/operating aid is currently needed. It is possible to connect an external GPS antenna for positioning. The data logger stores the parameters of up to 2,000 welds. The file (.pdf) with the welding protocols can be saved on a USB stick and printed directly from the welding machine with a thermal printer, or from a computer, with software that can be downloaded for free from the manufacturer's website.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Data logger and connection cable\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 4 weeks from order confirmation\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":53726008115468,"sku":null,"price":1095.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Datenlogger_RZEN-2000.png?v=1730746720"},{"product_id":"stumpfschweissgerat-zhcb-250","title":"Butt Welding Machine ZHCB 250","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCB 250 in a Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (either steel or aluminum) with the option of logging and operational assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHydraulic butt welding machines of type ZHCB are used for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 63 - 250 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust yet lightweight design. The welding machine is operated according to the welding parameter table. A timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the machine's weight and dimensions by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, thereby significantly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6, and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to actuate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the machine for which recording\/operational assistance is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for location tracking. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 63\u003cspan\u003e-250 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e3470 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without Reduction Inserts: 115 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 29 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 68KG","offer_id":53726824759564,"sku":"","price":6195.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 28KG","offer_id":53726824792332,"sku":"","price":6925.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Heizelement-Stumpfschweissmaschine-ZHCB-250_stumpfschweissen.png?v=1761208206"},{"product_id":"stumpfschweissgerat-zhcb-315","title":"Butt Welding Machine ZHCB 315","description":"\u003cp\u003e\u003cstrong\u003eZHCB 315 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and Affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the possibility of logging and operating assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 90 - 315 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated using the welding parameter table. A timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger to professionally log according to DVS 2207. The data logger guides the operator through the entire welding process, thus greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. We will be happy to send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters placed on the front of the welding machine significantly facilitates the operation of the welding machine and the maintenance of the necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step by step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a recording \/ operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 90 \u003cspan\u003e-315 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e3470 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 128 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 103KG","offer_id":53726850810124,"sku":"","price":6925.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 38KG","offer_id":53726850842892,"sku":"","price":7545.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/manuelle_Stumpfschweissmaschine_ZHCB-315.png?v=1761208589"},{"product_id":"stumpfschweissgeraet-zhcb-400","title":"Butt Welding Machine ZHCB 400","description":"\u003cp\u003e\u003cstrong\u003eZHCB 400 butt welding machine in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the possibility of logging and operating assistance through an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 110 - 400 mm without recording welding parameters, manually controlled. ZHCB - welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timers and the stopwatch for time measurement are integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for continuous pressure adjustment and pressure switching at maximum pressure. The new solution reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will be gladly sent upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB - butt welding machines are standardly equipped with a battery that maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the generator's operating time and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down the times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device from which a recording \/ operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for location tracking. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days after order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 110 \u003cspan\u003e- 400 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e4770 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 208 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel clamping inserts - 111KG","offer_id":53726858641676,"sku":"","price":10115.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminum clamping inserts - 65KG","offer_id":53726858674444,"sku":"","price":11155.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/stumpfschweissgeraet-ZHCB-500CNC.png?v=1770075318"},{"product_id":"stumpfschweissgerat-zhcb-630","title":"Butt Welding Machine ZHCB 630","description":"\u003cp\u003e\u003cstrong\u003eZHCB 630 Butt Welding Machine Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts (steel or aluminum optional) with the option of logging and operating assistance via an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type hydraulic butt welding machines are used for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 315 - 630 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust but lightweight design. The welding machine is operated according to the welding parameter table. Timer and stopwatch for time measurement have been integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will gladly be sent upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to activate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be carried out at any time on site. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a recording\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 315\u003cspan\u003e - 630 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: 8450\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 527 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 750\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 31 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Aluminum clamping inserts - 180KG","offer_id":53726862377228,"sku":"","price":17520.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet-Stumpfschweissmaschine_ZHCB-630.png?v=1761208433"},{"product_id":"stumpfschweissgerat-zhcb-1200","title":"Butt welding machine ZHCB 1200","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCB 1200 Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including clamping inserts with possibility for logging and operating assistance through an external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHydraulic butt welding machines of type ZHCB are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 630 - 1200 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust yet lightweight design. The welding machine is operated according to the welding parameter table. A timer and stopwatch for time measurement are integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for continuous pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, thus greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will be gladly sent to you upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters located on the front of the welding machine significantly simplifies the operation of the welding machine and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6 and 26. If required, we provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to shorten the operating time of the generator and reduce possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePossibility of logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself requires no additional tools and can be done at any time on site. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the device for which a record\/operating aid is currently required. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for positioning. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, with software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 4 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: \u003cspan\u003e630 - 1200 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: 28900\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 4990 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 2200\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 70 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Price on request only","offer_id":53726867128588,"sku":"","price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/ZHCB-1200.png?v=1761208367"},{"product_id":"stumpfschweissmaschine-zhcn-1200-e","title":"Butt Welding Machine ZHCN 1200 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 1200 - E in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including aluminum clamping inserts or optionally without\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 630\u003c\/span\u003e–1200 mm\u003cspan\u003e. All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the activities carried out thanks to the messages shown on the display. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed professionally and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld. The welding machine also allows for partial automation of certain operations, such as the automatic retraction and approach of the carriage when removing the heating element or the pressure reduction during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply; the diode on the heating element indicates whether the heating plate has reached the required temperature. The precise temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical consultation is possible via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: up to 4 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 630\u003cspan\u003e-1200\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e22000\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 3015 kilograms\u003c\/p\u003e\n\u003cp\u003eWeight of reduction clamping inserts: 1300 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: 2200\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 70 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Price on application","offer_id":53747621429516,"sku":null,"price":99999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissmaschine_ZHCN-1200E.png?v=1761208759"},{"product_id":"stumpfschweissmaschine-zhcn-630-cnc","title":"Butt Welding Machine ZHCN 630 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 630 - CNC in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - fully automatic CNC controlled welding machine (DVS 2207 compliant) including clamping inserts made of aluminum or optionally steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registration\/documentation of welding parameters. Suitable for joining pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 315 - 630 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN-CNC a bestseller among our butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert the facer and heating element when signaled by the machine, or remove them. The automation of the welding process reduces the susceptibility to errors to a minimum, and high-quality connections are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval to work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, thus enabling precise control of the welding process. The system reacts in real time to changes in the pipe's position and responds accordingly by adjusting the pressures and going through the subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick, automatic removal of the heating element between the pipes, thus reducing changeover time to the required minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, facer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eGeneral Technical Data:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 315\u003cspan\u003e-630 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e8650\u003c\/span\u003e\u003cspan\u003eW\u003c\/span\u003e\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 541 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 400V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e750 \u003c\/span\u003e\u003cspan\u003eWatts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 160 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 52 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Aluminium clamping inserts - 170kg","offer_id":53747710558476,"sku":"","price":20520.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/hydraulische_Stumpfschweissmaschine_ZHCN-630CNC.png?v=1761208222"},{"product_id":"stumpfschweissmaschine-zhcn-400-e","title":"Butt Welding Machine ZHCN 400 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 400 - E in a Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts (steel or aluminum optional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 110\u003c\/span\u003e–400 mm\u003cspan\u003e. All components of the device are controlled by the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, in which a recording device is permanently installed, which enables the control of the welding machine as well as the monitoring and display of the performed activities thanks to the messages displayed on the screen. The control program monitors the operator and prevents them from making mistakes (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you more information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Semi-Automatic Welding Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not observing the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain tasks, such as the automatic retraction and approach of the carriage when removing the heating element or lowering the pressure during the welding phase. This also saves valuable time on the construction site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled by the automatic power supply, the diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the control unit's display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters of up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planer, support holder, hydraulic unit, main frame, clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 14 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDVS 2207 Compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 110\u003cspan\u003e-400\u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e4950\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight without reduction inserts: 209\u003cspan\u003e \u003c\/span\u003eKilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower Supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal Power: \u003cspan\u003e550 Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure Range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMemory for Documentation: up to 3000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal Weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Steel gripping inserts - 111KG","offer_id":53748448428300,"sku":"","price":11275.99,"currency_code":"EUR","in_stock":true},{"title":"Aluminium clamping inserts - 55kg","offer_id":53748448461068,"sku":"","price":12285.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_ZHCN-400E.png?v=1761208046"},{"product_id":"zrsn160-stumpfschweissgerat-fur-die-werkstatt","title":"ZRSN160 - Mobile Butt Welding Machine","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMobile butt welding machine ZRSN 160 in a set\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003eDo you want a mobile heating element butt welding machine for use in the workshop or on the construction site for pipes and fittings from DA 50 to DA 160? Then the ZRSN 160 is the right machine for you.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGeneral information:\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cdiv\u003eThe butt welding machine type ZRSN-160 is used for linear and angled welding (0°-22.5°-\u0026gt;2α max=45°) of PE and PP pipes and fittings for the diameter range Ø 50 – 160 mm. The device is ideally suited for plumbing and air conditioning installations, drains and drainage systems, but of course also for other areas of application. The device is equipped with a manual gearbox with which you can achieve the desired pressing force. The force is measured with a spring force gauge. The welding machine is operated according to the welding parameter table. The timer is integrated in the handle of the heating element. The pipes are fastened using a quick-assembly system, consisting of two vices up to 160 mm diameter and two supports. Welding of smaller diameters is possible after installing reduction inserts for diameters 50, 63, 75, 90, 110, 125, 140 mm. The heating element is equipped with an electronic temperature controller with an adjustment range from 170 °C to 280 °C. The surfaces of the heating element are PTFE coated. The coating can be renewed cost-effectively. The planer is designed so that no chips can get into the device. The heating element and planer are permanently mounted on the shaft on the back of the device. The machine is manufactured in Poland according to current standards. Further information will be sent to you on request!\u003cspan\u003e\u003c\/span\u003e\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003emanual welding machine from d 50 - 160 mm\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003edurable and robust construction\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eelectronic timer function and temperature setting directly on the heating element\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePipe fastening via quick assembly system\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003eCoating of the heating element can be renewed cost-effectively\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003ePlaner designed so that no chips get into the device\u003c\/span\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as possible maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eDelivery time: currently up to 8 weeks from order confirmation\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eScope of delivery: basic machine, planer 230 volts, heating element 230 volts, complete reduction clamping inserts\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\u003c\/ul\u003e\n\n\n\u003c\/div\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":53787158741260,"sku":null,"price":4795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/Stumpfschweissgeraet_Werkstatt_ZRSN.png?v=1761208657"},{"product_id":"stumpfschweissgerat-zhcb-500","title":"Butt welding machine ZHCB 500","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCB 500 in Set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional and affordable - manual butt welding machine including aluminum clamping inserts with the option of logging and operating assistance via external data logger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB hydraulic butt welding machines are designed for professional butt welding of pipes made of PE, PP, PB, PVDF in the diameter range of 250 - 500 mm without recording welding parameters, manually controlled. ZHCB welding machines are characterized by a simple, robust yet lightweight design. The welding machine is operated according to the welding parameter table. A timer and stopwatch for time measurement are integrated into the temperature controller, which is located on the control panel of the hydraulic unit. The new hydraulic system allows for stepless pressure adjustment and pressure switching at maximum pressure. The new solution has reduced the weight and dimensions of the machine by 25%.\u003c\/span\u003e It is possible to connect our external data logger for professional logging according to DVS 2207. The data logger guides the operator through the entire welding process, thus greatly simplifying operation. This also minimizes sources of error during welding. The machine is manufactured in Poland according to current standards. Further information will gladly be sent upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Welding Table:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA table with welding parameters placed on the front of the welding machine significantly facilitates its operation and the maintenance of necessary welding parameters. The standard table contains parameters for PE pipes for SDR: 11, 17, 17.6, and 26. If required, we can provide tables for other materials (PP, PB, PVDF) and SDR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Battery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB butt welding machines are equipped with a battery as standard, which maintains the correct pressure during the cooling phase without the need to operate the pump motor. This solution allows you to reduce the operating time of the generator and minimize possible errors during the cooling time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Temperature Controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heating element is controlled by a temperature controller located on the hydraulic unit. The controller has an auxiliary timer and a stopwatch function for counting down times during individual phases of the welding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption for Logging according to DVS 2207:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eZHCB type welding machines can be retrofitted with the RZEN - 2000 recording device. The device is electrically connected to the hydraulic unit. The assembly itself does not require any additional tools and can be carried out on site at any time. The data logger simplifies the operation of the machine and guides the operator step-by-step through the welding process. Another important advantage of the data logger is its universality. A customer who has a larger number of ZHCB welding machines, even of different sizes, can have one recorder and connect it to the machine for which recording\/operational assistance is currently needed. The data logger stores the parameters of 2,000 welds. It is possible to connect an external GPS antenna for location. The file with the welds can be saved on a USB stick and printed directly from the welding machine with a thermal printer or from a computer, using software that can be downloaded free of charge from the manufacturer's website. The device can be found in our online shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, aluminum clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 21 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 250 \u003cspan\u003e- 500 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: 5450\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 229 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 370\u003cspan\u003e Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 29 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54660635590924,"sku":null,"price":12225.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/stumpfschweissgeraet-ZHCB-500CNC.png?v=1770075318"},{"product_id":"stumpfschweissmaschine-zhcn-500e","title":"Butt welding machine ZHCN 500 - E","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 500 - E in a set\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehere, price and performance are right - semi-automatic welding machine (DVS 2207 compliant) including clamping inserts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSemi-automatic butt welding machines of type \u003c\/span\u003eZHCN-E\u003cspan\u003e are used for welding pipes and fittings made of plastics \u003c\/span\u003ePE, PP, PB, PVDF\u003cspan\u003e with diameters from 250\u003c\/span\u003e–500 mm\u003cspan\u003e . All components of the device are controlled via the hydraulic control unit \u003c\/span\u003eUHEN-2.5 PLUS\u003cspan\u003e, which has a permanently installed recorder that allows control of the welding machine, as well as monitoring and display of the performed activities thanks to the messages shown on the display. The control program monitors the operator and prevents them from making errors (e.g., incorrect pressure setting, starting welding before the heating element has reached the required temperature, etc.). \u003c\/span\u003eZHCN-E-\u003cspan\u003e welding machines can automate part of the welding process.\u003c\/span\u003e It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe semi-automatic welding process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBy default, ZHCN-E welding machines operate in semi-automatic mode, guiding the operator step-by-step through the entire welding process according to DVS 2207, which must be strictly followed to ensure that the weld is performed correctly and cleanly. This prevents the welder, for example, from not adhering to the cooling time correctly, prematurely ending or skipping a welding process, which would result in an unclean weld seam. The welding machine also allows for partial automation of certain operations, such as automatic retraction and approach of the carriage when removing the heating element or reducing pressure during the welding phase. This also saves valuable time on site and minimizes operator errors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePGEN Heating Element:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe temperature of the heating element is controlled via the automatic power supply, and a diode on the heating element indicates whether the heating plate has reached the required temperature. The exact temperature of the heating plate can be monitored on the display of the control unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of welding parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 3000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software. The \u003cspan\u003esoftware is compatible with Windows versions \u003c\/span\u003eVista, 7, 8, 8.1, 10, 11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: heating element, planing tool, support holder, hydraulic unit, main frame, aluminum clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: 7 - 21 days from order confirmation\u003c\/p\u003e\n\u003cp\u003eGeneral Technical Data:\u003c\/p\u003e\n\u003cp\u003eDiameter: 250 \u003cspan\u003e- 500 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: 5100\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight without reduction inserts: 275 Kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 550\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 47 Kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54660639195404,"sku":null,"price":13545.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/stumpfschweissgeraet-ZHCB-500CNC.png?v=1770075318"},{"product_id":"stumpfschweissmaschine-zhcn-500-cnc","title":"Butt Welding Machine ZHCN 500 - CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine ZHCN 500 - CNC in Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur bestseller among butt welding machines - Fully automatic CNC-controlled welding machine (DVS 2207 compliant) including aluminum clamping inserts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAutomatic butt welding machine ZHCN–CNC with integrated system for registering\/documenting welding parameters. Suitable for connecting pipes and fittings made of PE, PP, PB, PVDF in the diameter range of 250 - 500 mm. Its unbeatable price-performance ratio, robust design, and simple operation make the ZHCN - CNC our bestseller among butt welding machines. With CNC-controlled machines, it is not necessary for the operator to be involved in setting the required pressure or controlling the movement of the pipes. The operator's only task is to mount the pipes, insert and remove the planing tool and heating element when signaled by the machine. By automating the welding process, susceptibility to errors is reduced to a minimum, and high-quality connections are achieved even by inexperienced personnel. Furthermore, the use of automatic butt welding machines is a prerequisite for a company's approval for work on gas installations. It is possible to connect an external GPS antenna. The machine can be operated in German, English, Russian, and Polish. The machine is manufactured in Poland according to current standards. We will gladly send you further information upon request!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAL-TIME Position Sensor:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eZHCN-CNC butt welding machines are equipped with a sensor that controls the position of the pipe, allowing for precise control of the welding process. The system reacts in real-time to changes in the pipe's position and adjusts pressures accordingly, progressing through subsequent phases of the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeating Element Removal:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome models are equipped with automatic heating element removal, which allows for quick, automatic removal of the heating element between the pipes, reducing setup time to the necessary minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegistration of Welding Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device can store parameters from up to 4000 welding cycles. Data stored in memory can be downloaded to a USB stick and then printed using connection software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Heating element, planing tool, support bracket, hydraulic unit, main frame, aluminum clamping inserts\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 3 weeks from order confirmation\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eGeneral Technical Data:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDVS 2207 compliant\u003c\/p\u003e\n\u003cp\u003eDiameter: 250\u003cspan\u003e-500 \u003c\/span\u003e\u003cspan\u003emm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal power: \u003cspan\u003e5650W\u003c\/span\u003e\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight with reduction inserts: 368 kilograms\u003c\/p\u003e\n\u003cp\u003eHydraulic Unit Technical Data:\u003c\/p\u003e\n\u003cp\u003ePower supply: 230V \/ 50Hz\u003c\/p\u003e\n\u003cp\u003eTotal power: 550\u003cspan\u003e Watt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure range: 0 - 100 Bar\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStorage for documentation: up to 4000 welding protocols\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTotal weight: 52 kilograms\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54660642799884,"sku":null,"price":15245.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/stumpfschweissgeraet-ZHCB-500CNC.png?v=1770075318"},{"product_id":"stumpfschweissmaschine-wds-4600-cnc","title":"Butt Welding Machine WDS 4600 CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine WDS 4600 CNC Smart Control (Set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe WIDOS 4600 CNC 3.0 is exclusively designed for heated tool butt welding of pipes and fittings made of PE, PP, PVDF materials, and in diameters ranging from 75 to 250 mm. \u003c\/span\u003eThe WIDOS control unit CNC 3.0 performs a butt welding operation with the WIDOS 4600 plastic welding machine after entering the type of plastic, pipe diameter, and wall thickness. The welding processes are recorded and saved on an SD card. The corresponding pipe data is entered manually via the control panel. Alternatively, it can be read in with a suitable pipe data card and the barcode reader pen.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur hydraulic machines from d 50 - d 1600 from Widos feature a compact hydraulic control unit as well as a basic machine with a removable outer clamping ring for easy clamping of short fittings. This makes the machines ideal for use in confined construction site conditions. \u003c\/span\u003e\u003cspan\u003eThe heating elements of the F-series comply with DVS 2208 and are equipped with high-quality control devices and non-stick coatings, optionally also with easily replaceable non-stick covers for larger wall thicknesses.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe robust facing units are equipped with high-torque drives and safety interlocks as well as high-quality, double-sided knives. This ensures long service life and low spare parts requirements.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe compact and lightweight hydraulic units are operated via a sensitive hand lever valve, allowing for easily controllable welding processes. The integrated pressure accumulator dampens pressure drops during the welding cycle and reduces the need for readjustment. The base machine is connected to the hydraulic unit via flexible hoses and flat-sealing quick couplings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReducer inserts in various designs for all common pipe types and dimensions, as well as an extensive range of accessories and tools, are also available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003efrom d 75 to d 250 mm\u003c\/li\u003e\n\n\u003cli\u003eelectronically controlled hydraulic unit\u003c\/li\u003e\n\n\u003cli\u003esimple menu navigation via display\u003c\/li\u003e\n\n\u003cli\u003ewith welding data recording\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eincl. 2D barcode scanner\u003c\/li\u003e\n\n\u003cli\u003eUSB port for reading out welding data\u003cbr\u003eMetal housing with frame\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as possible maintenance or repair on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Basic machine with basic clamping tool da 250, CNC hydraulic control unit 230 volts, facing tool 230 volts, heating element 230 volts, adjustment box for facing tool and heating element, transport box\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 12 weeks from order confirmation\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54691600728332,"sku":null,"price":17170.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/WIDOS-4911-blau.png?v=1771707208"},{"product_id":"stumpfschweissmaschine-wds-4900-cnc","title":"Butt Welding Machine WDS 4900 CNC","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine WDS 4900 CNC Smart Control (Set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe WIDOS 4900 CNC 3.0 is designed exclusively for heating element butt welding of pipes and fittings made of PE, PP, PVDF materials in diameters from 90 to 315 mm. \u003c\/span\u003eThe WIDOS control unit CNC 3.0 performs a butt welding process with the WIDOS 4900 plastic welding machine after entering the type of plastic, pipe diameter, and wall thickness. The welding processes are logged and saved to an SD card. The corresponding pipe data is entered manually via the control panel. Alternatively, they can be read in with a corresponding pipe data card and a barcode reader pen.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur hydraulic machines from d 50 - d 1600 from Widos feature a compact hydraulic control unit and a basic machine with a detachable outer clamping ring for easy clamping of short fittings. This makes the machines ideal for use in confined construction site conditions. \u003c\/span\u003e\u003cspan\u003eThe heating elements of the F-series comply with DVS 2208 and are equipped with high-quality control devices and non-stick coatings, optionally also with easily interchangeable non-stick covers for larger wall thicknesses.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe robust planing units are equipped with high-torque drives and safety interlocks, as well as high-quality, double-sided usable blades. This ensures a long service life and low spare parts requirements.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe compact and lightweight hydraulic units are operated via a finely controllable hand lever valve, allowing for easily adjustable welding processes. The integrated pressure accumulator dampens pressure drops during the welding cycle and reduces the need for readjustment. The basic machine is connected to the hydraulic unit via flexible hoses and flat-sealing quick couplings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReducer inserts in various designs for all common pipe types and dimensions, as well as a comprehensive range of accessories and tools, are also available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003efrom d 90 to d 315 mm\u003c\/li\u003e\n\n\u003cli\u003eelectronically controlled hydraulic unit\u003c\/li\u003e\n\n\u003cli\u003esimple menu navigation via display\u003c\/li\u003e\n\n\u003cli\u003ewith welding data recording\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eincl. 2D barcode scanner\u003c\/li\u003e\n\n\u003cli\u003eUSB connection for reading out welding data\u003cbr\u003eMetal housing with frame\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair upon request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Basic machine with basic clamping tool da 315, CNC hydraulic control unit 230 V \/ 1100 W, planing tool 230 V \/ 1150 W, heating element 230 V \/ 2100 W, adjustment box for planing tool and heating element, transport box\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 12 weeks from order confirmation\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54691619012876,"sku":null,"price":18512.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/WIDOS-4911-blau.png?v=1771707208"},{"product_id":"stumpfschweissmaschine-wds-5100-cnc","title":"Butt Welding Machine WDS 5100 CNC","description":"\u003cp\u003e\u003cstrong\u003eButt welding machine WDS 5100 CNC Smart Control (Set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe WIDOS 5100 CNC 3.0 is designed exclusively for heating element butt welding of pipes and fittings made of PE, PP, PVDF materials in diameters from 200 to 450 mm.\u003c\/span\u003e The WIDOS control unit CNC 3.0 performs a butt welding process after entering the plastic type, pipe diameter, and wall thickness with the WIDOS 5100 plastic welding machine. The welding processes are logged and saved to an SD card. The corresponding pipe data is entered manually via the control panel. Alternatively, it can be read in with a suitable pipe data card and a barcode reader pen.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition to a compact hydraulic control unit, our hydraulic machines from d 50 - d 1600 from Widos feature a basic machine with a removable outer clamping ring for easy clamping of short fittings. This makes the machines ideal for use in confined construction site conditions.\u003c\/span\u003e\u003cspan\u003eThe heating elements of the F-series comply with DVS 2208 and are equipped with high-quality control devices and non-stick coatings, optionally also with easily replaceable non-stick coverings for larger wall thicknesses.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe robust facing planers are equipped with high-torque drives and safety interlocks, as well as high-quality, double-sided knives. This ensures a long service life and low spare part requirements.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe compact and lightweight hydraulic units are operated via a finely controllable hand lever valve, allowing for easily regulated welding processes. The integrated pressure accumulator dampens pressure drops during the welding cycle and reduces the need for readjustment. The basic machine is connected to the hydraulic unit via flexible hoses and flat-sealing quick couplings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReducer inserts in various designs for all common pipe types and dimensions, as well as an extensive range of accessories and tools, are also available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003efrom d 200 to d 450 mm\u003c\/li\u003e\n\n\u003cli\u003eelectronically controlled hydraulic unit\u003c\/li\u003e\n\n\u003cli\u003eeasy menu navigation via display\u003c\/li\u003e\n\n\u003cli\u003ewith welding data recording\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eincl. 2D barcode scanner\u003c\/li\u003e\n\n\u003cli\u003eUSB connection for reading out welding data\u003cbr\u003eMetal housing with frame\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as possible maintenance or repair on request!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Basic machine with basic clamping tool da 450, CNC hydraulic control unit 230 Volt, facing planer 230 Volt, heating element 230 Volt, adjustment box for facing planer and heating element, transport box\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 12 weeks from order confirmation\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54691619143948,"sku":null,"price":27720.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/WIDOS-4911-blau.png?v=1771707208"},{"product_id":"stumpfschweissmaschine-wds-6100-cnc","title":"Butt Welding Machine WDS 6100 CNC","description":"\u003cp\u003e\u003cstrong\u003eButt Welding Machine WDS 6100 CNC Smart Control (Set)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe WIDOS 6100 CNC 3.0 is designed exclusively for heating element butt welding of pipes and fittings made of PE, PP, PVDF materials, in diameters from 315 to 630 mm. \u003c\/span\u003eThe WIDOS control unit CNC 3.0 performs a butt welding process with the WIDOS 6100 plastic welding machine after entering the plastic type, pipe diameter, and wall thickness. Welding processes are logged and saved to an SD card. The corresponding pipe data is entered manually via the control panel. Alternatively, it can be read in using a suitable pipe data card and a barcode reader pen.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur hydraulic machines from d 50 - d 1600 from Widos feature a compact hydraulic control unit and a basic machine with a detachable outer clamping ring for easy clamping of short fittings. This makes the machines ideal for use in confined construction site conditions. \u003c\/span\u003e\u003cspan\u003eThe heating elements of the F-series comply with DVS 2208 and are equipped with high-quality control devices and non-stick coatings, optionally also with easily replaceable non-stick covers for larger wall thicknesses.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe robust planing units are equipped with high-torque drives and safety interlocks, as well as high-quality, double-sided blades. This ensures long service life and low spare parts requirements.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe compact and lightweight hydraulic units are operated via a finely controllable hand lever valve, allowing for easily adjustable welding processes. The integrated pressure accumulator dampens pressure drops during the welding cycle and reduces the need for readjustment. The basic machine is connected to the hydraulic unit via flexible hoses and flat-sealing quick couplings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReducer inserts in various designs for all common pipe types and dimensions, as well as an extensive range of accessories and tools, are also available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003efrom d 350 to d 630 mm\u003c\/li\u003e\n\n\u003cli\u003eelectronically controlled hydraulic unit\u003c\/li\u003e\n\n\u003cli\u003esimple menu navigation via display\u003c\/li\u003e\n\n\u003cli\u003ewith welding data recording\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eincl. 2D barcode scanner\u003c\/li\u003e\n\n\u003cli\u003eUSB port for reading out welding data\u003cbr\u003eMetal housing with frame\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical advice is available via our contact form or by phone! We offer all spare parts for the machine as well as any maintenance or repair services on request! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope of delivery: Basic machine with basic clamping tool da 450, CNC hydraulic control unit 230 volts, planing tool 230 volts, heating element 230 volts, adjustment box for planing tool and heating element, transport box\u003c\/p\u003e\n\u003cp\u003eDelivery time: currently up to 12 weeks from order confirmation\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PE Schweisstechnik","offers":[{"title":"Default Title","offer_id":54691619701004,"sku":null,"price":35433.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/files\/WIDOS-4911-blau.png?v=1771707208"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/0033\/3627\/collections\/Kunststoffschweissmaschine_Baustelle_bis_DA_110_mm_Miniplast_S_und_T_Ratsche_2.png?v=1761210141","url":"https:\/\/peschweisstechnik.de\/en\/collections\/stumpfschweissgeraete.oembed","provider":"PE Schweisstechnik","version":"1.0","type":"link"}